VX-3308WM - Uncategorized TOA - Free user manual and instructions
Find the device manual for free VX-3308WM TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mixer Amplifier / Public Address System |
| Model | VX-3308WM |
| Power Output | 120W RMS @ 4 ohms |
| Frequency Response | 50 Hz - 20 kHz (±3 dB) |
| Input Channels | 8 (4 mic/line, 4 stereo line) |
| Microphone Input Sensitivity | -50 dBV (0 dB = 1V/Pa) |
| Line Input Sensitivity | -10 dBV |
| Output Impedance | 4 ohms (min), 70V/100V line |
| Dimensions (W x H x D) | 430 x 88 x 350 mm (17 x 3.5 x 13.8 in) |
| Weight | 8.5 kg (18.7 lbs) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 200 W max |
| Cooling System | Internal fan, variable speed |
| Main Functions | Volume, tone, echo, priority override, zone selection |
| Protection Features | Overload, short circuit, thermal, DC offset |
| Connectors | XLR, 1/4" TRS, RCA, Euroblock, speakON |
| Remote Control | RS-232, contact closure inputs |
| Mounting | 19" rack mount (2U), brackets included |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Compliance | CE, RoHS |
| Maintenance and Cleaning | Wipe with dry cloth; do not use solvents; clean air vents regularly |
| Safety | Class I equipment, ground connection required; replace fuse with same rating |
| Spare Parts and Repairability | Contact TOA service center; use only original parts |
| Warranty | 2 years (subject to local regulations) |
Frequently Asked Questions - VX-3308WM TOA
How do I connect microphones to the VX-3308WM?
Use the XLR inputs on channels 1-4 for dynamic microphones. For condenser mics, ensure phantom power (+48V) is enabled via the switch on the rear panel.
What is the maximum power output of this amplifier?
The VX-3308WM delivers 120W RMS into 4 ohms, or 70W into 70V/100V line systems.
Can I use this unit in a 100V line installation?
Yes, select the 100V line setting via the rear panel switch. Ensure total speaker load does not exceed the amplifier's rated power.
How do I set up priority override for announcements?
Use the priority contact input on the back. A momentary closure to ground activates the override, muting background music and allowing microphone input.
The amplifier goes into protect mode frequently. What should I check?
Check for short circuits in speaker wiring, ensure impedance is not too low, and verify proper ventilation. The amp may also protect if overheated.
How do I adjust the built-in echo effect?
Locate the ECHO control on the front panel. Turn it clockwise to increase the effect level. The echo time can be adjusted via internal jumpers (see manual).
Can I control the VX-3308WM remotely?
Yes, via the RS-232 port using standard serial commands. Contact closure inputs also allow remote zone selection and paging.
What type of fuse does the unit use?
Use a T5A 250V fuse for 100-120V, or T3.15A 250V for 220-240V. Always replace with the same type and rating.
How do I clean the front panel and vents?
Wipe the front panel with a soft, dry cloth. Use a vacuum cleaner with a brush attachment to gently clean the air vents to prevent dust buildup.
Where can I find the full user manual?
Download the PDF manual from our website at notice-facile.com by searching for 'TOA VX-3308WM'. It contains detailed specifications, wiring diagrams, and troubleshooting.
User questions about VX-3308WM TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VX-3308WM - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VX-3308WM by TOA.
USER MANUAL VX-3308WM TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : VX-3308WM
Category : Uncategorized