PW-1230SW - Loudspeaker TOA - Free user manual and instructions
Find the device manual for free PW-1230SW TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Subwoofer |
| Woofer Size | 12 inches (300 mm) |
| Power Handling (Continuous) | 300 W |
| Power Handling (Peak) | 600 W |
| Impedance | 8 ohms |
| Frequency Response | 40 Hz - 200 Hz |
| Sensitivity (1W/1m) | 95 dB |
| Enclosure Type | Bass reflex (vented) |
| Input Connectors | Neutrik Speakon NL4MP x 2 |
| Dimensions (W x H x D) | 500 mm x 400 mm x 450 mm |
| Weight | 21 kg |
| Finish | Black textured paint |
| Grille | Perforated steel with foam backing |
| Protection | Overload protection via internal fuse |
| Application | Professional sound reinforcement, installed audio |
| Mounting | Floor standing, stackable |
| Included Accessories | Rubber feet, user manual |
Frequently Asked Questions - PW-1230SW TOA
How do I connect the PW-1230SW to an amplifier?
Use a Neutrik Speakon NL4MP cable. Connect the amplifier output to the INPUT connector on the subwoofer. If daisy-chaining, connect a second speaker to the LINK connector. Ensure the amplifier impedance matches the subwoofer's 8-ohm rating.
What is the recommended amplifier power?
We recommend an amplifier that delivers 300 W to 600 W per channel into 8 ohms. Using an amplifier with power exceeding the speaker's peak handling may cause damage.
Can I use the PW-1230SW outdoors?
The PW-1230SW is designed for indoor use only. Exposure to moisture or extreme weather may damage the speaker. A weatherproof cover is not included.
What is the optimal placement for this subwoofer?
Place the subwoofer on a solid, flat surface near a wall or corner to reinforce low frequencies. Avoid direct contact with walls to prevent rattling. For best bass response, aim the front of the speaker toward the listening area.
How do I clean and maintain the PW-1230SW?
Wipe the enclosure with a soft, dry cloth. Do not use water or solvents. Clean the grille with a vacuum or soft brush. Check connections periodically for tightness.
Is the PW-1230SW a powered or passive speaker?
It is a passive subwoofer, meaning it requires an external amplifier. No built-in amplification.
What is the warranty period?
TOA typically offers a 5-year warranty for professional loudspeakers. Check your local dealer or the user manual for specific terms.
Can I daisy-chain multiple PW-1230SW units?
Yes, use the LINK output connector on the first subwoofer to connect to the INPUT of the next. Keep total impedance within amplifier limits (e.g., two 8-ohm speakers in parallel = 4 ohms).
What type of signal cable should I use?
For typical installations, use a shielded Speakon cable with 2-conductor or 4-conductor wire. For long runs, use a thicker gauge (e.g., 12 AWG) to minimize power loss.
How do I set the crossover frequency?
If using with an external crossover or DSP, set the crossover at 80-120 Hz for standard use. The subwoofer itself does not have a built-in crossover; it reproduces all frequencies sent by the amplifier.
User questions about PW-1230SW TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PW-1230SW - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PW-1230SW by TOA.
USER MANUAL PW-1230SW TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : PW-1230SW
Category : Loudspeaker