H8F HP51X UK - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free H8F HP51X UK HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Hotpoint |
| Model | H8F HP51X UK |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | Approximately 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Water Pressure | 0.03 - 1 MPa (0.3 - 10 bar) |
| Place Settings | 14 place settings |
| Energy Class | A+ |
| Noise Level | 44 dB(A) re 1 pW |
| Number of Programs | 8 |
| Key Programs | Eco, Intensive, Normal, Quick, Rinse, Soak, Auto, Delicate |
| Additional Features | Flexible Load Rack, Half Load, Delay Start, Salt & Rinse Aid Indicators |
| Water Consumption | 9.5 L per cycle (Eco program) |
| Energy Consumption | 0.93 kWh per cycle (Eco program) |
| Installation | Built-in / Freestanding (based on version) |
| Safety Features | Child lock, Overflow protection, Anti-flood system |
| Maintenance | Clean filters monthly, descale periodically, check spray arms |
| Spare Parts Availability | Racks, filters, spray arms, seals, heating element, control board |
| Reparability | DIY-friendly for basic parts; professional service for complex repairs |
Frequently Asked Questions - H8F HP51X UK HOTPOINT
How do I start a wash cycle on the Hotpoint H8F HP51X UK?
Load the dishwasher, add detergent, select a program using the control panel, then press the start button. Close the door securely.
What should I do if the dishwasher doesn't clean properly?
Check that spray arms are not blocked, clean filters, ensure proper detergent amount, and use the correct program for the soil level.
How to clean the filters of the Hotpoint dishwasher?
Turn off the appliance, remove the lower rack, twist and lift the filter assembly. Rinse under running water, scrub if needed, and reassemble.
Why is the dishwasher not draining water?
Check the drain hose for kinks, ensure the filter is clean, and inspect the pump impeller for blockages. If problem persists, call service.
What does the salt refill indicator mean?
The indicator lights up when the water softener needs salt. Open the salt compartment, fill with dishwasher salt, and close tightly.
How to use the half load function?
Press the half load button before starting the cycle. It reduces water and energy consumption for smaller loads.
Can I put pots and pans in the dishwasher?
Yes, but ensure they are dishwasher-safe. Place them facing down on the bottom rack for best cleaning.
What is the delay start feature and how to use it?
Delay start allows you to set a time (1-24 hours) for the cycle to begin. Press the delay button repeatedly until the desired time is shown.
How to reset the Hotpoint H8F HP51X UK dishwasher?
Press and hold the start button for 3-5 seconds until the display resets. If that fails, turn off the power at the wall for 10 seconds.
Why is the dishwasher noisy?
Check for loose items, ensure the spray arms are not hitting dishes, and verify the dishwasher is level. Unusual grinding sounds may indicate a problem with the pump.
User questions about H8F HP51X UK HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual H8F HP51X UK - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H8F HP51X UK by HOTPOINT.
USER MANUAL H8F HP51X UK HOTPOINT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HOTPOINT
Model : H8F HP51X UK
Category : Dishwasher