WSK100 REG - Uncategorized JUNG - Free user manual and instructions
Find the device manual for free WSK100 REG JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Room Temperature Controller |
| Brand | JUNG |
| Model | WSK100 REG |
| Dimensions (H x W x D) | 90 mm x 60 mm x 40 mm |
| Weight | 0.15 kg |
| Power Supply | 24 V AC/DC |
| Power Consumption | 1.5 W |
| Mounting Type | Flush-mounted (REG) |
| Display | LCD with backlight |
| Control Elements | Rotary knob and touch buttons |
| Temperature Range | 5 °C to 30 °C |
| Accuracy | ±0.5 °C |
| Functions | Heating/cooling control, timer, frost protection |
| Communication | KNX bus (optional) |
| Protection Class | IP20 |
| Ambient Temperature | 0 °C to 45 °C |
| Maintenance | Clean with dry cloth, no solvents |
| Safety | Overvoltage protection, safe electrical isolation |
| Spare Parts | Available through JUNG service |
| Reparability | Repairable by authorized technicians |
Frequently Asked Questions - WSK100 REG JUNG
What is the JUNG WSK100 REG used for?
The JUNG WSK100 REG is a flush-mounted room temperature controller designed for heating and cooling systems. It provides precise temperature regulation with timer and frost protection functions.
How do I install the WSK100 REG?
Installation should be carried out by a qualified electrician. The device is flush-mounted in a standard 60 mm deep junction box. Connect the 24 V AC/DC supply and load according to the wiring diagram in the manual.
Can I use the WSK100 REG with a KNX system?
Yes, the WSK100 REG supports KNX bus communication via an optional KNX interface module. This allows integration into a smart building automation system.
What is the temperature range of the controller?
The adjustable temperature range is from 5 °C to 30 °C, with an accuracy of ±0.5 °C. The frost protection function activates below 5 °C.
How do I set the timer?
Press the timer button to enter time programming mode. Use the rotary knob to set hours and minutes, then confirm with the OK button. The device stores up to 4 on/off periods per day.
What does the display show?
The LCD display shows current temperature, setpoint temperature, time, and operating mode (heating/cooling/timer). A backlight illuminates for easy reading.
How do I clean the device?
Clean the surface with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Ensure the device is disconnected from power before cleaning.
What should I do if the display is blank?
Check the power supply (24 V AC/DC) and the fuse. If power is present, contact JUNG support for possible display failure. Do not open the device yourself.
Is the WSK100 REG compatible with a heat pump?
Yes, the controller works with both heating and cooling systems, including heat pumps. Select the appropriate mode in the configuration menu for optimal operation.
Where can I find spare parts or service?
Spare parts and service are available through JUNG authorized dealers and service centers. Visit the JUNG website or contact their support for assistance.
User questions about WSK100 REG JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WSK100 REG - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WSK100 REG by JUNG.
USER MANUAL WSK100 REG JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : WSK100 REG
Category : Uncategorized