SENCOR

SWS 11000 - Weather Station SENCOR - Free user manual and instructions

Find the device manual for free SWS 11000 SENCOR in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SENCOR SWS 11000 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Weather Station
Brand Sencor
Model SWS 11000
Dimensions (Main Unit) Approx. 120 x 80 x 25 mm
Weight (Main Unit) Approx. 200 g (without batteries)
Power Supply 2 x AAA batteries (not included) or USB-C power adapter
Wireless Sensor 1 outdoor sensor included; range up to 60m in open area
Temperature Range (Indoor) 0°C to +50°C (32°F to 122°F)
Temperature Range (Outdoor) -20°C to +60°C (-4°F to 140°F)
Humidity Range 20% to 95% RH (indoor and outdoor)
Barometric Pressure Display in hPa/inHg with historical trend
Clock Radio-controlled (DCF) or manual setting; with alarm and snooze
Weather Forecast Icons: Sunny, Cloudy, Rainy, Stormy (based on pressure trend)
Moon Phase Display of current moon phase
Display Backlit LCD; adjustable brightness levels
Mounting Table stand or wall mount (screws not included)
Cleaning Wipe with a dry, soft cloth; do not use abrasive cleaners
Safety Keep away from water and extreme heat; use only specified batteries
Spare Parts & Repairability Replacement outdoor sensors available; no user-serviceable parts inside

Frequently Asked Questions - SWS 11000 SENCOR

How do I set up the weather station?
Insert batteries into both the main unit and the outdoor sensor. Place the sensor outdoors (protected from direct rain) and keep the main unit indoors. The devices will automatically connect. If not, press the 'CH' or 'SEARCH' button on the main unit.
Why is the outdoor sensor not showing data?
Check that the sensor is within range (max 60m open field). Ensure the batteries are fresh and inserted correctly. Interference from thick walls or metal objects may reduce range; try repositioning the sensor.
How do I change the batteries?
For the main unit: slide open the battery compartment on the back. For the sensor: open the small screw-locked compartment. Use only new alkaline or rechargeable NiMH batteries of the same type. After replacing, the connection may resume automatically.
How do I set the time manually?
Press and hold the 'TIME SET' or 'CLOCK' button for 3 seconds. Use +/- buttons to adjust hours and minutes. Confirm with 'SET' or wait. If you want the radio-controlled time, select 'RC ON' in settings.
What does the weather forecast icon mean?
The station predicts weather based on barometric pressure trends - Sunny (increasing pressure), Cloudy (stable), Rainy (falling). It is a forecast for the next 6-12 hours, not a current condition reading.
Can I use rechargeable batteries?
Yes, rechargeable NiMH batteries (1.2V) can be used. However, the low voltage may reduce radio reception range slightly. Do not use lithium primary batteries unless specified.
How do I adjust the display brightness?
Look for a 'DIMMER' or 'LIGHT' button. Press it repeatedly to cycle through brightness levels (e.g., high, medium, low, off). Some models have an auto-dimming feature based on ambient light.
What is the moon phase display?
The station shows the current phase of the moon (new, first quarter, full, last quarter) as a graphic. This is based on a built-in calendar and does not require sensors.
Why is the time incorrect despite having radio control?
The radio-controlled time (DCF) requires strong signal. At night the signal is usually stronger. Try placing the unit near a window facing Germany (for Central Europe). Manual time setting is available as fallback.
How do I reset the weather station?
Remove all batteries from both units. Wait 30 seconds. Insert batteries again (sensor first, then main unit). Press the 'RESET' button on the back of the main unit with a pen tip. It will revert to factory defaults.

User questions about SWS 11000 SENCOR

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Weather Station in PDF format for free! Find your manual SWS 11000 - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWS 11000 by SENCOR.

USER MANUAL SWS 11000 SENCOR

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SENCOR

Model : SWS 11000

Category : Weather Station