MIX-M501MAP - Smoke detector Mircom - Free user manual and instructions
Find the device manual for free MIX-M501MAP Mircom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Model | MIX-M501MAP |
| Brand | Mircom |
| Detection Method | Photoelectric |
| Operating Voltage | 24 VDC |
| Standby Current | 50 µA |
| Alarm Current | 70 mA |
| Sensitivity | 0.5% - 2.0% per foot obscuration |
| Operating Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | 10% to 93% non-condensing |
| Dimensions (Diameter) | 4.0 inches (102 mm) |
| Dimensions (Height) | 2.0 inches (51 mm) |
| Weight | 6.6 oz (187 g) |
| Material | Flame-retardant plastic |
| LED Indicator | Red (steady on alarm, flash standby) |
| Testing | Integral test switch; remote test via panel |
| Compatibility | Mircom MIX series fire alarm panels |
| Certifications | UL, ULC, CSFM listed |
| Warranty | 5 years limited |
| Maintenance | Clean annually with a vacuum cleaner |
| Alarm Contacts | Form A relay (normally open) |
| Remote Output | Yes, for remote indicator or relay |
| Self-diagnostics | Automatic drift compensation and sensitivity test |
| Installation | Base mount, 2-wire connection to panel |
| Environment | Indoor use only |
Frequently Asked Questions - MIX-M501MAP Mircom
How do I install the Mircom MIX-M501MAP smoke detector?
Install the detector by mounting the base to a standard electrical box, connect the 2-wire loop to the panel, and twist the detector head onto the base. Ensure polarity matches panel wiring.
Does the MIX-M501MAP require battery backup?
No, the detector is powered directly by the fire alarm panel at 24 VDC. No internal battery is needed.
What causes false alarms on this detector?
False alarms can be caused by steam, dust, insects, or high humidity. Regular cleaning and proper location away from kitchens and bathrooms can reduce false alarms.
How do I test the smoke detector?
Press and hold the integral test switch on the detector. The LED should turn on steady and the panel should receive an alarm. Alternatively, use the panel's test function.
How often should I clean the detector?
Clean the detector at least once a year. Use a soft brush or vacuum cleaner to remove dust from the vents. Do not use water or chemicals.
What does the LED indicator mean?
In standby, the LED flashes briefly every few seconds. In alarm, it stays on steady. A trouble condition may cause a different flash pattern (e.g., rapid flash). Consult panel manual.
Is the MIX-M501MAP compatible with third-party panels?
The detector is designed for Mircom MIX series panels. Compatibility with other panels is not guaranteed; use with Mircom panels for proper operation.
What is the lifespan of this smoke detector?
The expected lifespan is approximately 10 years under normal conditions. Replace the detector if it fails tests or after 10 years from manufacture date.
How do I reset the detector after an alarm?
Reset the detector by sending a reset command from the fire alarm panel. The detector will automatically reset and return to standby after the alarm condition clears.
Can the detector be painted?
No, painting the detector can block the vents and affect sensitivity. Keep the detector unpainted and clean.
User questions about MIX-M501MAP Mircom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual MIX-M501MAP - Mircom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MIX-M501MAP by Mircom.
USER MANUAL MIX-M501MAP Mircom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mircom
Model : MIX-M501MAP
Category : Smoke detector