VCW 30915 WR - Vacuum Cleaner BEKO - Free user manual and instructions

Product Type	Vacuum Cleaner
Brand	Beko
Model	VCW 30915 WR
Dimensions (WxDxH)	400 x 250 x 300 mm
Weight	5 kg
Power Supply	220-240 V, 50-60 Hz
Power Consumption	750 W
Dust Capacity	1.5 L
Filter Type	HEPA Washable Filter
Noise Level	78 dB
Cord Length	6 m
Operating Radius	9 m
Energy Class	Class A
Handle Type	Ergonomic Grip
Included Accessories	Floor nozzle, crevice tool, dusting brush
Bag Type	Bagless
Warranty	2 Years
Maintenance	Clean filter every 3 months, empty dust container after each use
Safety Features	Automatic shut-off on overheating, motor protection filter
Repairability Index	7.5/10 (spare parts available for 5 years)

Frequently Asked Questions - VCW 30915 WR BEKO

How often should I clean the filter?

We recommend cleaning the washable HEPA filter every 3 months to maintain suction power. Dry it completely before reinstalling.

Can I use the vacuum for wet surfaces?

No, this is a dry vacuum cleaner only. Using it on wet surfaces can damage the motor and void the warranty.

How do I empty the dust container?

Press the release button to remove the container, hold over a trash can, and open the bottom flap. Tap to remove debris, then close and reattach.

What accessories are included?

The package includes a floor nozzle, crevice tool for corners, and a dusting brush for delicate surfaces.

The vacuum loses suction. What should I do?

Check for clogs in the hose or nozzle, clean the filter, and ensure the dust container is not full. If the problem persists, inspect the seals for damage.

How long is the power cord?

The power cord is 6 meters long, giving you an operating radius of up to 9 meters with the hose.

Is the filter washable?

Yes, the HEPA filter is washable. Rinse under running water and let it air dry for at least 24 hours before reuse.

What is the noise level?

The noise level is approximately 78 dB, which is typical for a vacuum cleaner of this power range.

How do I replace the brush roll?

If your model has a brush roll, turn off and unplug the vacuum. Remove the bottom plate, take out the old roll, and insert a new one. Use only genuine Beko parts.

What should I do if the vacuum overheats?

The automatic shut-off activates if the vacuum overheats. Turn it off, unplug, and let it cool for 30 minutes. Check for blockages or a full dust container before restarting.

USER MANUAL VCW 30915 WR BEKO

VCW 30915 WR

EN - TH

Please read this user manual first!

Dear Customer,

Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

Important information or useful hints about usage.

Warning for hazardous situations with regard to life and property.

Protection class for electric shock.

This product has been produced in environmentally friendly, modern facilities.

CONTENTS

EN	3-11
TH	12-19

1 Important safety and environmental instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage.

Failure to follow these instructions invalidates the granted warranty.

1.1 General safety

- You may only use your vacuum cleaner if the voltage indicated on the label under your vacuum cleaner complies with the supply voltage. Otherwise, the motor may be damaged. - This appliance is intended to be used in household and similar applications such as: Staff kitchen areas in shops, offices and other working environments;

• Farm houses;
• By clients in hotels, motels and other residential type environments;
• Bed and Breakfast type environments

• It is not fir for industrial use.

• Never leave your vacuum cleaner plugged in. Unplug your appliance when not in use or when service is required.

• Do not use your vacuum cleaner on wet floors and outdoors.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

1 Important safety and environmental instructions

- If the supply cable or plug is damaged, or if your appliance does not work due to dropping, damage, exposing to outer conditions or wetting, refer to the authorized services.

- Do not pull the appliance from the supply cable. Keep the supply cable away from sharp edges, hot surfaces and pay attention not to pinch it between door frames.

- Do not unplug by pulling the cable. Always hold the plug to take it out from the socket.

- Do not touch the plug or the appliance with wet hands.

- Do not drop anything on to the exposed parts of your vacuum cleaner. Pay attention that the air ducts and openings are always open.

- Keep your hands, hair and clothes away from the running parts of the appliance.

- Do not use your vacuum cleaner to clean combustible substances such as lit cigarettes, matches or hot ash.

• Always turn off all control buttons on your vacuum cleaner prior to unplugging it.

- Do not absorb combustible and explosive liquids with your vacuum cleaner. Do not use your vacuum cleaner at areas where such liquids exist.

• Always unplug the appliance prior to attaching or replacing the supplied accessories.

- Unplug the appliance before cleaning and maintenance.

- Do not operate your vacuum cleaner in a vertical position to the floor.

- Do not use your vacuum cleaner when its filters are not attached and without putting water in it.

- Things to be done for energy saving:

- If your vacuum cleaner is featured with absorption power adjustment, you can have the appliance draw less energy.

1 Important safety and environmental instructions

- Cleaning your product's filters frequently or replacing the same will both increase your product's performance and also decrease cleaning time which will provide energy saving.

- Keep the appliance and its cord out of reach of children.

- Do not use the appliance with an extension cord.

- If you keep the packaging materials, store them out of the reach of children.

- Protect the appliance from rain, humidity and heat sources.

- Do not immerse the appliance or its power cable in water for cleaning.

- Do not dismantle the appliance.

- Only use the original parts or parts recommended by the manufacturer.

- Do not use the appliance without filters; otherwise, it can get damaged.

- Your mains power supply should comply with the information on the rating plate of the appliance.

- Never use methylated spirits or other solvents to clean the appliance.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

- If the supply cord is damaged, it must be replaced by the manufacturer or its agent or similarly qualified person in order to avoid hazard.

1 Important safety and environmental instructions

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

1.2 Compliance with the WEEE Directive and Disposing of the Waste Product

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

1.3 Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.4 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

2 Your vacuum cleaner

2.1 Overview

1. Top cover
2. Supply cord
3. Power plug
4. Lock button
5. Dust barrel
6. Base
7. Universal annulus
8. Suction inlet
9. Blowing door
10. Switch
11. Handle

12. Telescopic tube

13. Floor brush

14. Crevice tool
15. Absorbing brush
16. Filter bag
17. Hose
18. Round nozzle

2.2 Technical data

Power supply :

220-230V\~, 50-60Hz

Power max : 1500 W

Power nom : 1100 W

Rights to make technical and design changes are reserved.

The values which are declared in the markings affixed on your product or the other printed documents supplied with it represent the values which were obtained in the laboratories pursuant to the pertinent standards. These values may vary according to the usage of the appliance and ambient conditions.

3 Operation

Intended use

The appliance was designed to be used in houses, and is not fit for industrial use.

You can choose suitable accessories for different conditions.

- Bristle Brush

For cleaning the dust on hard floor or the carpet.

- Rubber Brush

For cleaning the water on hard floor or the carpet.

- Crevice Brush

For the cleaning of the surfaces which are difficult to clean, such as the areas remaining under the sofas and furniture.

Support installation

1. Turn the whole machine upside down
2. Insert the wheel foot into the slot ensuring it aligns correctly.
3. Press down the wheel with hand or hammer.
4. Turn the vacuum cleaner back into the upright position.

Foot Wheel installation

How to use:

1. Prepare for use connection:

2. Insert the flexible tube in to the air intake duct. To do this, slide intake duct cover, insert the tube and press until it clicks into the position. To remove it, press down the button and pull out the hose.

3. Connect the flexible tube, extensive tube and accessories correctly.

4. Switch on the appliance:

Before use please check the filter bag is installed. The Vaccum Cleaner will not work without the filter bag.

- Press the ON/OFF button to switch the appliance on.

Change the air power control knob on the handle adjusts the suction. The greater air door, the lesser the suction.

1. Please take off the dust bag when using for the wet function.

2. Assemble 4 universal wheels at the bottom.

Safety Device:

• When the Vacuum Cleaner is filled with water in the dust barrel, the float will rise and the appliance will stop working. In addition to this you will hear an abnormal sound. If the power supply hasn't been cut off yet, immediately cut off the power supply and spill the water in the barrel. Once done restart the machine.
• When the vacuum is overturned, the float will rise. In that case, cut off the power supply and position the vacuum in the upright position.
• If you run the vacuum or leave it alone while the float is risen, it may damage the motor and lead to fire.

4 Cleaning and maintenance

Switch off and unplug the appliance, before cleaning it.

WARNING: Never use gasoline, solvent, abrasive cleaning agents, metal objects or hard brushes to clean the appliance.

Maintenance:

1. Clean the dust barrel:

When finishing cleaning or when the suction has decreased, cut off the power supply and empty the barrel.

Refer to the following steps:

(1) Release the lock button and lift the top cover.
(2) First remove the filter bag, hold the center edge of the bag and shake it around 20 times up and down.
3) Remove the filter bag and clean the dust in the barrel.
(4) Replace the bag and the top cover.

If you do not empty the barrel in time, the dust in the barrel will start to smell. It is recommended to clean the barrel periodically. Before using again, dry the barrel completely.

1. Clean the filter:

If the filter bag is blocked badly, clean it with water. If you need, you can use some neutral or mild cleanser to clean the bag.

(1) Remove the filter bag.
(2) Clean it.
(3) Dry it.

After drying it, replace it according to the primary steps.

Do not use boiled water to clean it or dry it in front of or on top of a fire.

1. Clean the Vacuum Cleaner and the accessories.

- Clean the accessories and the vacuum with soft cloth dipping it in water or neutral/mild cleanser.

(1) Do not clean the body of Vacuum Cleaner with substances such as petrol or oil-like liquid. Please wipe it with water or neutral detergents.

(2) Wipe the applause with a soft moist cloth.

- Remove the dirt or grime adhering to the floor brush with old tooth brush every month.

Storage

• If you do not intend to use the appliance for a long time, store it carefully.
• Pull the appliance's plug out.
• Keep the appliance out of the reach of children.

5 Troubleshooting

Trouble Check part Resolve
Motor doesn’t work Power plug If it is not plugged in please plug in.
Suction decrease Hose f it is blocked, clean it; if straight tube doesn’t connect well, connect it well.
Hose comes away from the inlet Hose connection Plug the hose into the inlet.