Night Vision 31302 - Clock Equity - Free user manual and instructions
Find the device manual for free Night Vision 31302 Equity in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm Clock with Night Light |
| Brand | Equity |
| Model | Night Vision 31302 |
| Dimensions (approx.) | 6 x 3 x 5 inches (15.2 x 7.6 x 12.7 cm) |
| Weight (approx.) | 0.5 lb (227 g) |
| Power Source | 2 x AA batteries (not included) or AC adapter (not included) |
| Display Type | Digital LCD with blue backlight |
| Time Format | 12-hour or 24-hour selectable |
| Alarm Function | Single alarm with snooze (9 minutes) |
| Night Vision Feature | Built-in night light with adjustable brightness |
| Temperature Display | Indoor temperature in °C/°F |
| Calendar | Date display (day, month, year) |
| Battery Backup | Maintains time during power outage |
| Material | Plastic casing |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety Warning | Keep away from water and extreme temperatures. |
| Spare Parts Availability | Not available; contact manufacturer for support. |
| Reparability | Non-repairable by user; dispose of properly. |
Frequently Asked Questions - Night Vision 31302 Equity
How do I set the time on the Equity Night Vision 31302 clock?
Press and hold the Time Set button until the hour digits flash. Use the Up and Down buttons to adjust the hour. Press Time Set again to set minutes, then press Mode to confirm.
How do I turn on the night light?
Press the Night Light button on the top of the clock. Press repeatedly to cycle through brightness levels or turn it off.
The clock is not displaying properly. What should I do?
Check that the batteries are inserted correctly or connect the AC adapter. If the display is dim, replace the batteries. Press the Reset button with a pin if needed.
How do I set the alarm?
Press and hold the Alarm Set button. Use the Up/Down buttons to set the alarm hour and minute. Press Alarm Set to save. Ensure the alarm icon is visible on the display.
How do I use the snooze function?
When the alarm sounds, press the Snooze button (usually the top button). The alarm will stop and ring again after 9 minutes.
Can I switch between 12-hour and 24-hour time format?
Yes, press and hold the Mode button for 3 seconds. The display will toggle between 12H and 24H. Release the button to select.
How do I clean the clock?
Use a dry, soft cloth to gently wipe the surface. Do not use any cleaning agents or water, as they may damage the electronics.
Why is the temperature display not accurate?
The sensor may be affected by direct sunlight or nearby heat sources. Move the clock to a shaded area and allow 10-15 minutes for stabilization.
What batteries does the clock use?
The clock requires 2 AA alkaline batteries (not included) for backup. For regular use, you can also use the optional AC adapter (DC 3V).
Is the clock wall-mountable?
No, the Night Vision 31302 is designed for tabletop use only. Do not attempt to hang it on a wall.
User questions about Night Vision 31302 Equity
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual Night Vision 31302 - Equity and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Night Vision 31302 by Equity.
USER MANUAL Night Vision 31302 Equity
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Equity
Model : Night Vision 31302
Category : Clock