Rainbow Bar 9 - Lighting Varytec - Free user manual and instructions
Find the device manual for free Rainbow Bar 9 Varytec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Light Bar |
| Model | Rainbow Bar 9 |
| Brand | Varytec |
| Number of LEDs | 9 |
| LED Type | RGB (3-in-1) or RGBW |
| Power per LED | 3 W |
| Total Power Consumption | 30 W |
| Power Supply | AC 100-240V, 50/60 Hz |
| DMX Channels | 3 or 7 (selectable) |
| Control Modes | DMX, Master/Slave, Sound-Active, Auto |
| Housing Material | Aluminum |
| Dimensions (L x W x H) | 30 x 6 x 8 cm (approx.) |
| Weight | 1.2 kg (approx.) |
| IP Rating | IP20 (indoor use only) |
| Cooling | Passive convection |
| Mounting Options | Floor stand, truss clamp (mounting bracket included) |
| Beam Angle | 40 degrees |
| Data Connectors | 3-pin XLR in/out |
| Power Connector | IEC C14 (power cord included) |
| Fuse | F1A 250V (5x20 mm) |
| Certifications | CE, RoHS |
| Operating Temperature | 0°C to 40°C |
| Cleaning Instructions | Wipe with dry cloth; disconnect power before cleaning |
| Safety Notes | Do not look directly into light source; ensure ventilation |
| Spare Parts Availability | LED modules, power supply, fuses (contact Varytec support) |
Frequently Asked Questions - Rainbow Bar 9 Varytec
How do I set the DMX address on the Rainbow Bar 9?
Use the MENU button to enter settings, navigate to DMX Address with UP/DOWN, then set the desired address using the same buttons. Press ENTER to confirm.
How can I control the light without a DMX controller?
You can use Sound-Active mode (built-in microphone) or Auto mode for pre-programmed color chases. Switch via the control panel or remote (if included).
What is the maximum number of units in a master/slave chain?
Typically up to 32 units can be daisy-chained using DMX cables. Ensure the master is set to Master mode and slaves to Slave mode.
Can I use the Rainbow Bar 9 outdoors?
No, the IP20 rating means it is only suitable for indoor use. Protect from moisture and dust.
How do I clean the fixtures?
Disconnect power and wipe the housing with a dry, lint-free cloth. Do not use liquids or abrasive cleaners. Clean the LED lenses gently.
What should I do if the unit does not power on?
Check the power cable connection and the fuse. Replace the fuse only with the same type: F1A 250V. If problem persists, contact support.
How many DMX channels does the fixture use?
It can be set to either 3-channel mode (RGB control) or 7-channel mode (RGB + dimmer, strobe, etc.). Refer to the manual for channel mapping.
Can I replace the LEDs myself?
LEDs are not user-serviceable. For replacements, contact Varytec or an authorized service center to ensure proper repair and safety.
What is the beam angle and how does it affect coverage?
The 40-degree beam angle provides a medium wash. For wider coverage, place the fixture farther away or use multiple units.
Is the unit compatible with an IR remote?
Some versions include a remote control for basic functions. If not included, you can purchase a compatible IR remote from Varytec.
User questions about Rainbow Bar 9 Varytec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Rainbow Bar 9 - Varytec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Rainbow Bar 9 by Varytec.
USER MANUAL Rainbow Bar 9 Varytec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Varytec
Model : Rainbow Bar 9
Category : Lighting