PLCM2710 - Camera Pyle - Free user manual and instructions
Find the device manual for free PLCM2710 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Trail / Game Camera |
| Brand | Pyle |
| Model | PLCM2710 |
| Image Sensor | 5 MP CMOS (12 MP interpolated) |
| Resolution | 12 MP still images |
| Video Resolution | 720p HD |
| Night Vision | Up to 30 ft (9 m) with infrared LEDs |
| Motion Detection | Yes, adjustable sensitivity, 120° detection angle |
| Trigger Speed | 0.8 seconds |
| Power Source | 4 x AA batteries (not included) |
| Storage | SD card up to 32 GB (not included) |
| Dimensions | 4.5 x 3.2 x 2.1 inches (114 x 81 x 53 mm) |
| Weight | 0.5 lbs (227 g) without batteries |
| Mounting | Tree strap or screw mount |
| Water Resistance | IP54 splash-proof |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Additional Features | Time-lapse, timer mode, password protection |
| Maintenance | Clean lens with soft, dry cloth; check batteries regularly |
| Safety | Keep away from children; do not expose to extreme heat or moisture |
| Repairability | No user-serviceable parts; contact Pyle for support |
Frequently Asked Questions - PLCM2710 Pyle
How do I set up the Pyle PLCM2710 for the first time?
Insert 4 AA batteries and an SD card (up to 32 GB). Slide the power switch to ON. The camera will start in motion detection mode by default. Mount it using the strap or screw mount at the desired location.
What type of batteries does the PLCM2710 use?
It uses 4 x AA batteries (alkaline or lithium recommended). Lithium batteries perform better in cold weather. Batteries are not included.
How do I insert the SD card?
Open the battery compartment door. Insert the SD card with the label facing the back of the camera until it clicks. To remove, push the card inward and release.
How do I adjust the motion detection sensitivity?
Use the menu button to access settings. Navigate to 'Motion' or 'Sensitivity' and choose from Low, Medium, or High. Higher sensitivity increases the detection range but may cause more false triggers.
How do I enable night vision?
Night vision is automatic. The camera activates infrared LEDs when ambient light is low. Ensure the IR LEDs are not obstructed. You cannot manually disable night vision.
How do I change the date and time?
Press the Menu button, navigate to 'Clock' or 'Date/Time', then use the arrow buttons to adjust. Confirm with the OK button.
How do I view photos and videos on the camera?
You cannot view media directly on the camera; it has no LCD screen. Remove the SD card and use a card reader on a computer to view files.
How do I reset the camera to factory settings?
Press the Menu button, find 'Reset' or 'Default' in settings, and confirm. Alternatively, remove batteries for 30 seconds.
Is the Pyle PLCM2710 waterproof?
It is splash-proof with an IP54 rating, meaning it resists water splashes but should not be submerged. Avoid prolonged exposure to heavy rain.
What should I do if the camera is not taking photos?
Check that batteries are fresh and inserted correctly. Ensure the SD card is properly formatted (FAT32) and not full. Verify that the power switch is ON and the camera is in motion detection mode.
User questions about PLCM2710 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual PLCM2710 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLCM2710 by Pyle.
USER MANUAL PLCM2710 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLCM2710
Category : Camera