CDA HN6413SD - Cooker

HN6413SD - Cooker CDA - Free user manual and instructions

Find the device manual for free HN6413SD CDA in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CDA HN6413SD - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Freestanding Electric Cooker
Brand CDA
Model HN6413SD
Dimensions (H x W x D) 85 cm x 60 cm x 60 cm
Weight 65 kg
Power Supply 230 V ~ 50 Hz, 10 kW
Oven Type Multifunction Electric Oven
Oven Capacity 70 Liters
Hob Type Ceramic Induction Hob
Number of Cooking Zones 4
Energy Efficiency Class A
Cleaning Method Self-Cleaning with Catalytic Liners
Safety Features Child Lock, Automatic Shut-off, Residual Heat Indicator
Spare Parts Availability Available from CDA Service Centers
Warranty 2 Years Manufacturer Warranty
User Manual Pages 28
Rating 9.5 / 10 on Notice-Facile.com

Frequently Asked Questions - HN6413SD CDA

How do I install the CDA HN6413SD cooker?
Ensure the cooker is installed by a qualified electrician. Connect to a 230 V ~ 50 Hz supply with a suitable circuit breaker. Leave 5 cm clearance on sides and rear for ventilation. Level the cooker using adjustable feet.
How do I clean the oven?
The oven features catalytic liners that absorb fat and grime. Run the oven at 250°C for one hour to burn off residues. Wipe the interior with a damp cloth after cooling. Do not use abrasive cleaners.
Why is the oven not heating?
Check the power supply and circuit breaker. Ensure the function selector is set to a heating mode. If the oven still does not heat, the heating element or thermostat may be defective. Contact CDA service.
How do I use the child lock?
Activate child lock by pressing and holding the lock button for 3 seconds. Deactivate the same way. When active, the hob and oven controls are locked to prevent accidental operation.
What type of cookware can I use on the induction hob?
Use ferromagnetic cookware such as cast iron, enameled iron, or stainless steel with a magnetic base. Check with a magnet if unsure. Avoid glass, ceramic, or aluminum without induction base.
How do I set the oven timer?
Press the timer button, set desired cooking time using +/− buttons, then press timer again to confirm. The oven will switch off automatically when time expires. A signal will sound.
What is the recommended oven temperature for baking?
For cakes and pastries, preheat to 180°C convection or 200°C static. For bread, 220°C. Always refer to your recipe and adjust based on oven performance.
How do I replace the oven light bulb?
Disconnect power. Remove the glass cover by turning anti-clockwise. Replace with a 25W, 300°C heat-resistant bulb (G9 base). Reassemble and restore power.
What should I do if the hob shows an error code?
Common error codes: E0 (no pan), E1 (overvoltage), E2 (over temperature). Check cookware and pans. Reset by turning off the appliance for 30 seconds. If error persists, contact service.
Is the CDA HN6413SD energy efficient?
Yes, it is rated energy class A. The induction hob provides fast heating with minimal energy loss. Use residual heat and match pan size to cooking zone to save energy.

User questions about HN6413SD CDA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Cooker in PDF format for free! Find your manual HN6413SD - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HN6413SD by CDA.

USER MANUAL HN6413SD CDA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CDA

Model : HN6413SD

Category : Cooker