Reveal NR4835DSV - Refrigerated display Structural Concepts - Free user manual and instructions
Find the device manual for free Reveal NR4835DSV Structural Concepts in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Reach-In Refrigerator |
| Brand | Structural Concepts |
| Model | Reveal NR4835DSV |
| Height | 83.5 inches (212 cm) |
| Width | 48 inches (122 cm) |
| Depth | 35 inches (89 cm) |
| Weight | 450 lbs (204 kg) |
| Electrical Requirements | 115 V / 60 Hz / 15 A |
| Temperature Range | 33°F to 38°F (0.5°C to 3.3°C) |
| Storage Capacity | 48.5 cubic feet (1.37 m³) |
| Number of Shelves | 4 adjustable wire shelves |
| Door Type | Solid hinged door with handle |
| Refrigerant | R-290 (Propane) |
| Defrost Type | Automatic electric defrost |
| Warranty | 3 years parts and labor |
| Cleaning | Use mild soap and water; do not use abrasive cleaners |
| Maintenance | Clean condenser coils every 3 months |
| Safety | Do not block air vents; keep children away |
| Spare Parts | Order through authorized dealers or Structural Concepts |
| Repairability | Modular components for easy service |
Frequently Asked Questions - Reveal NR4835DSV Structural Concepts
How do I set the temperature on my Reveal NR4835DSV?
Use the digital control panel located inside the unit. Press the 'Set' button, then use the arrow keys to adjust the temperature between 33°F and 38°F. Press 'Set' again to confirm.
What should I do if the refrigerator is not cooling properly?
Check that the power cord is plugged in and the circuit breaker is not tripped. Ensure the condenser coils are clean and the air vents are not blocked. Also, verify the door is closing properly.
How often should I clean the condenser coils?
Clean the condenser coils every three months using a soft brush or vacuum. Dirty coils can cause poor cooling and increased energy consumption.
Can I change the door swing direction?
Yes, the door can be reversed. Refer to the installation manual for step-by-step instructions. You will need a screwdriver and possibly a helper.
What type of refrigerant is used?
The Reveal NR4835DSV uses R-290 (propane) refrigerant. It is environmentally friendly but flammable. Service must be performed by qualified technicians.
How do I defrost the unit?
This model features automatic electric defrost. No manual defrost is needed. If frost accumulates, ensure the door is closing tightly and the gasket is clean.
What are the recommended clearance requirements?
Allow at least 4 inches (10 cm) of space on all sides for proper airflow. The unit should be placed on a level surface away from heat sources.
How do I replace the interior light bulb?
First, disconnect power. Remove the light cover by unscrewing or prying it off. Replace the bulb with an appliance-grade LED or incandescent of the same wattage (typically 40W max). Reattach the cover.
Is there a warranty on the product?
Structural Concepts offers a standard 3-year warranty on parts and labor. Some components like compressors may have longer coverage. Contact customer service for details.
What should I do if the door seal is damaged?
Inspect the gasket for tears or warping. Clean it with mild soap and water. If damaged, order a replacement gasket from Structural Concepts and follow the installation guide to replace it.
User questions about Reveal NR4835DSV Structural Concepts
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerated display in PDF format for free! Find your manual Reveal NR4835DSV - Structural Concepts and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reveal NR4835DSV by Structural Concepts.
USER MANUAL Reveal NR4835DSV Structural Concepts
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Structural Concepts
Model : Reveal NR4835DSV
Category : Refrigerated display