SX300 - Smartphone FLY - Free user manual and instructions
Find the device manual for free SX300 FLY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smartphone |
| Brand | FLY |
| Model | SX300 |
| Dimensions (H x W x D) | 145 mm x 70 mm x 8.5 mm |
| Weight | 150 g |
| Display | 4.5-inch TFT LCD capacitive touchscreen |
| Processor | 1.2 GHz dual-core |
| RAM | 512 MB |
| Internal Storage | 4 GB (expandable via microSD) |
| Operating System | Android 4.2 Jelly Bean |
| Camera (Rear) | 5 MP with autofocus and LED flash |
| Camera (Front) | 2 MP |
| Battery | Li-Ion 2000 mAh (removable) |
| Connectivity | Wi-Fi 802.11 b/g/n, Bluetooth 4.0, GPS, microUSB 2.0 |
| Network | GSM / HSPA (3G) |
| Sensors | Accelerometer, proximity, light sensor |
| Power Supply | AC adapter 5V/1A |
| Maintenance and Cleaning | Clean with a soft, dry cloth. Do not use harsh chemicals. |
| Safety Information | Keep away from water and extreme temperatures. Use only approved accessories. |
| Spare Parts and Repairability | Battery and screen may be replaced by authorized service center. |
| General Information | FLY SX300 is a budget-friendly smartphone released in 2014. |
Frequently Asked Questions - SX300 FLY
How do I turn on the FLY SX300 for the first time?
Press and hold the Power button located on the right side until the screen lights up. Follow the on-screen setup wizard.
How can I insert the SIM card and microSD card?
Remove the back cover and battery. Insert the SIM card into the SIM slot and microSD card into the memory card slot. Then replace the battery and cover.
Why is my battery draining quickly?
Close unused apps, reduce screen brightness, disable Wi-Fi/Bluetooth when not needed, and check for battery-intensive apps in Settings > Battery.
How do I take a screenshot?
Press and hold the Power and Volume Down buttons simultaneously for 2 seconds.
How to reset the phone to factory settings?
Go to Settings > Backup & Reset > Factory Data Reset. Confirm to erase all data. Alternatively, use hardware keys: turn off phone, press Power + Volume Up to enter recovery mode.
Can I use the phone while charging?
Yes, it is safe to use the phone while charging, but it may charge slower. Use only the original charger to avoid damage.
What Android version is installed?
The FLY SX300 comes with Android 4.2 Jelly Bean out of the box.
How do I connect to Wi-Fi?
Go to Settings > Wi-Fi, toggle it on, select your network, and enter the password if required.
How to update the software?
Go to Settings > About Phone > System Updates. If an update is available, follow the prompts to download and install it over Wi-Fi.
What to do if the phone freezes?
Press and hold the Power button for 10 seconds to force restart. If the problem persists, try a battery pull or factory reset.
User questions about SX300 FLY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smartphone in PDF format for free! Find your manual SX300 - FLY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SX300 by FLY.
USER MANUAL SX300 FLY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLY
Model : SX300
Category : Smartphone