ACD200 - Air purifier Ausclimate - Free user manual and instructions
Find the device manual for free ACD200 Ausclimate in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Brand | Ausclimate |
| Model | ACD200 |
| Dimensions (W x D x H) | 21.5 x 21.5 x 38 cm |
| Weight | 3.6 kg |
| Power Supply | 220-240V ~ 50Hz |
| Power Consumption | 60 W |
| Noise Level | 25 - 50 dB(A) |
| Coverage Area | Up to 30 m² |
| Clean Air Delivery Rate (CADR) | 200 m³/h |
| Filter Type | H13 HEPA + Activated Carbon + Pre-filter |
| Fan Speeds | 3 (Low, Medium, High) |
| Timer | 1 - 8 hours |
| Display | LED with touch controls |
| Special Modes | Sleep Mode, Auto Mode |
| Filter Replacement Indicator | Yes |
| Night Light | Yes |
| Child Lock | Yes |
| Remote Control | Included |
| Filter Maintenance | Clean pre-filter every 2 weeks; replace HEPA + carbon filter every 6-12 months |
| Safety Features | Overheat protection, tip-over auto shut-off |
| Warranty | 2 years |
Frequently Asked Questions - ACD200 Ausclimate
How often should I replace the filter?
The pre-filter should be cleaned every 2 weeks. The H13 HEPA and carbon filter combination should be replaced every 6 to 12 months, depending on usage and air quality. The filter replacement indicator will remind you.
What is the coverage area of the ACD200?
The ACD200 is designed for rooms up to 30 m². For optimal performance, ensure the unit is placed in a central location with good airflow.
Does the ACD200 have a sleep mode?
Yes, the Sleep Mode reduces fan speed and dims the LED display for quiet operation, making it suitable for use in bedrooms at night.
How do I clean the pre-filter?
Remove the front cover and take out the pre-filter. Wash it under running water or use a vacuum cleaner. Let it dry completely before reinserting.
Can I use the ACD200 continuously?
Yes, the ACD200 is designed for continuous use. The timer function allows you to set operating hours from 1 to 8 hours, or you can run it in auto mode.
Is the ACD200 effective against allergens?
Yes, the H13 HEPA filter captures 99.97% of airborne particles as small as 0.3 microns, including pollen, dust mites, pet dander, and mold spores.
How do I reset the filter replacement indicator?
After installing a new filter, press and hold the 'Filter Reset' button (usually on the control panel) for 3-5 seconds until the indicator light turns off.
What does the auto mode do?
In auto mode, the built-in particle sensor monitors air quality and automatically adjusts the fan speed to maintain a clean environment.
Can I use the ACD200 without the remote control?
Yes, all functions can be controlled manually via the touch panel on the unit. The remote control provides convenient access from a distance.
Does the ACD200 have a child lock?
Yes, the child lock feature prevents accidental button presses by locking the control panel. Refer to the manual to enable or disable it.
User questions about ACD200 Ausclimate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual ACD200 - Ausclimate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACD200 by Ausclimate.
USER MANUAL ACD200 Ausclimate
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ausclimate
Model : ACD200
Category : Air purifier