A18 Pro - Wi-Fi repeater Tenda - Free user manual and instructions
Find the device manual for free A18 Pro Tenda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Brand | Tenda |
| Model | A18 Pro |
| Frequency Band | Dual-band (2.4 GHz + 5 GHz) |
| Wireless Standard | IEEE 802.11 a/b/g/n/ac |
| Max Speed | Up to 1200 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Ports | 1x 10/100 Ethernet Port |
| Power Supply | DC 5V/1A |
| Dimensions | 100 x 100 x 50 mm |
| Weight | 200 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| LED Indicators | Power, WPS, Signal Strength |
| Buttons | WPS, Reset |
| Security | WPA-PSK/WPA2-PSK, WPS |
| Installation | WPS push button or Web setup |
| Warranty | 1 year limited |
| Package Contents | Repeater, Ethernet cable, Power adapter, User manual |
| Maintenance | Clean with dry cloth; avoid liquids |
Frequently Asked Questions - A18 Pro Tenda
How do I set up the Tenda A18 Pro repeater?
Plug the repeater into a power outlet near your router. Press the WPS button on your router, then press the WPS button on the repeater within 2 minutes. The LED will turn solid when connected. Alternatively, connect to the repeater's Wi-Fi (Tenda_XXXX) and follow the web setup guide.
How to reset the Tenda A18 Pro to factory settings?
Press and hold the Reset button on the side of the repeater for about 6 seconds until the LED blinks rapidly. Release and wait for the device to reboot.
Can the A18 Pro work with any router?
Yes, it is compatible with most standard routers or access points that support 2.4 GHz and/or 5 GHz Wi-Fi.
How to change the Wi-Fi name and password of the repeater?
After setup, log in to the web interface (http://tendawifi.com or 192.168.0.254) using the default admin password (usually 'admin'). Go to Wireless Settings and modify SSID and password.
Why is the LED on the repeater not lighting up?
Ensure the power outlet is working and the repeater is properly plugged in. If still off, try a different outlet. If the LED remains off, the device may be faulty.
Does the A18 Pro support WPA3 encryption?
No, the A18 Pro supports up to WPA2-PSK. It does not support WPA3.
How to update the firmware on the Tenda A18 Pro?
Download the latest firmware from Tenda's support page. Log into the web interface, go to System Tools > Firmware Upgrade, choose the file, and click Upgrade. Do not turn off power during update.
Can I use the A18 Pro as an access point?
Yes, the A18 Pro supports Access Point mode. Connect an Ethernet cable from your router to the repeater's LAN port, and configure AP mode via the web interface.
What should I do if the Wi-Fi connection keeps dropping?
Try moving the repeater closer to the router. Check for interference from other electronic devices. Update firmware and ensure both router and repeater use different channels if possible.
How many devices can connect to the A18 Pro?
The A18 Pro can typically support up to 15 wireless devices simultaneously, depending on network traffic and environment.
User questions about A18 Pro Tenda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual A18 Pro - Tenda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A18 Pro by Tenda.
USER MANUAL A18 Pro Tenda
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tenda
Model : A18 Pro
Category : Wi-Fi repeater