LunarPod - Light projector American Audio - Free user manual and instructions
Find the device manual for free LunarPod American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker with LED |
| Brand | American Audio |
| Model | LunarPod |
| Dimensions | Approx. 7.5 x 7.5 x 8.5 inches |
| Weight | Approx. 2.5 lbs |
| Power Source | Rechargeable battery (7.4V 1800mAh) |
| Charging | USB (5V, 1A) |
| Battery Life | Up to 6 hours |
| Connectivity | Bluetooth 4.0, 3.5mm Aux input |
| Wireless Range | Up to 33 feet |
| Speaker Output | 15W RMS |
| Frequency Response | 80Hz - 18kHz |
| LED Effects | Multi-color, sound-active mode |
| Microphone | Built-in for hands-free calls |
| Controls | Power, Volume, Mode, Play/Pause |
| Additional Features | FM Radio, TF card slot |
| Included Accessories | USB charging cable, aux cable, user manual |
| Material | ABS plastic with fabric grille |
| Compatibility | All Bluetooth-enabled devices |
| Warranty | 1 year limited |
Frequently Asked Questions - LunarPod American Audio
How do I pair the LunarPod with my phone?
Turn on the speaker by pressing the power button. Press the Bluetooth button to enter pairing mode (indicated by a blinking blue LED). On your phone, enable Bluetooth and select American Audio LunarPod from the list. Once connected, the LED will turn solid blue.
What is the battery life of the LunarPod?
The built-in rechargeable battery provides up to 6 hours of playtime at moderate volume. Actual battery life may vary based on volume level and audio content.
Can I use the speaker while it is charging?
Yes, you can continue to play music while the speaker is connected to a USB power source. This does not damage the battery.
How do I clean the LunarPod?
Use a soft, dry cloth to gently wipe the exterior. For the fabric grille, use a soft brush to remove dust. Avoid using water, cleaning solvents, or abrasive materials.
Does the LunarPod have a built-in microphone?
Yes, it has a built-in microphone that allows you to take hands-free calls. When a call comes in, music will pause and you can answer by pressing the Play/Pause button.
How do I control the LED lights?
Press the LED button to cycle through different modes: steady on, flashing, sound-active, and off. The sound-active mode changes colors in sync with the music.
What should I do if the speaker won't turn on?
First, ensure the battery is charged by connecting the USB cable for at least 30 minutes. If it still doesn't turn on, try pressing the power button for 3 seconds. If the issue persists, reset the speaker (see question 10).
Can I connect two LunarPods together for stereo sound?
No, the LunarPod does not support daisy-chaining or TWS (True Wireless Stereo) pairing. Each speaker operates independently.
What devices are compatible with the LunarPod?
The speaker is compatible with all Bluetooth-enabled devices such as smartphones, tablets, laptops, and MP3 players. It also has an auxiliary input for non-Bluetooth devices.
How do I reset the LunarPod to factory settings?
Press and hold the Bluetooth and Volume+ buttons simultaneously for about 5 seconds until you hear a beep. The speaker will restart and clear all paired devices.
User questions about LunarPod American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Light projector in PDF format for free! Find your manual LunarPod - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LunarPod by American Audio.
USER MANUAL LunarPod American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : LunarPod
Category : Light projector