Perkons Voice - Sound module Erica Synths - Free user manual and instructions
Find the device manual for free Perkons Voice Erica Synths in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Percussion Voice Module |
| Brand | Erica Synths |
| Model | Perkons Voice |
| Format | Eurorack |
| Width | 10 HP |
| Depth | 25 mm |
| Weight | 120 g |
| Power Supply | +12V: 100 mA, -12V: 20 mA |
| Power Connector | 10-pin Eurorack ribbon cable |
| Audio Output | 3.5mm mono jack, impedance 1kΩ |
| Controls | Pitch, Decay, Tone, Level knobs; Trigger input |
| Sound Engine | Analog percussion synthesis with noise and tone generators |
| Trigger Input | 10V peak-to-peak, threshold 2.5V |
| Functions | Kick, snare, hi-hat emulation with adjustable parameters |
| Construction | PCB mounted pots and jacks, aluminum front panel |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Compliance | CE, RoHS |
| Safety | Do not expose to moisture; disconnect power before patching |
| Maintenance | Clean with dry cloth; do not use solvents |
| Spare Parts | Available from Erica Synths or authorized dealers |
| Repairability | Repair by qualified technician; no user-serviceable parts |
Frequently Asked Questions - Perkons Voice Erica Synths
How do I power the Perkons Voice module?
Connect the included 10-pin ribbon cable to your Eurorack case's power bus board, ensuring the red stripe aligns with the -12V pin. The module requires +12V (100 mA) and -12V (20 mA).
What is the depth of the Perkons Voice?
The module depth is approximately 25 mm, so it fits most skiffs and cases. Always leave at least 5 mm clearance behind the module for airflow.
Can I use a standard 3.5mm trigger signal?
Yes, it accepts 10V peak-to-peak triggers with a 2.5V threshold. Typical Eurorack gates and triggers work fine.
What sound types does Perkons Voice generate?
It is an analog percussion voice capable of kick, snare, and hi-hat sounds, with adjustable pitch, decay, tone, and level controls.
How do I clean the front panel?
Use a soft, dry cloth. Avoid solvents or abrasive cleaners as they may damage the printing and finish.
Is the Perkons Voice compatible with eurorack cases that provide only +12V?
No, it requires both +12V and -12V. Most Eurorack cases provide both, but verify your power supply before installation.
What is the warranty period?
Erica Synths offers a 2-year warranty from the date of purchase. Keep your receipt for warranty claims.
Can I replace knobs or jacks myself?
Only qualified technicians should replace components. Opening the module may void the warranty.
Why is there no sound output?
Check power connections, ensure the audio output is plugged into a mixer/amp, and verify that the level knob is turned up and a trigger is being sent.
Where can I download the full manual?
The manual is available for free download on notice-facile.com in PDF format for the Erica Synths Perkons Voice.
User questions about Perkons Voice Erica Synths
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sound module in PDF format for free! Find your manual Perkons Voice - Erica Synths and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Perkons Voice by Erica Synths.
USER MANUAL Perkons Voice Erica Synths
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Erica Synths
Model : Perkons Voice
Category : Sound module