ADAM-4019+ - Module d'acquisition de données Advantech - Free user manual and instructions
Find the device manual for free ADAM-4019+ Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Data Acquisition Module |
| Dimensions (W x H x D) | 72 x 114 x 22 mm |
| Weight | 150 g |
| Power Supply | 10-30 VDC |
| Input Channels | 4 Analog Inputs (voltage/current) |
| Communication Interface | RS-485, Modbus RTU |
| Operating Temperature | -10°C to 70°C |
| Storage Temperature | -20°C to 85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Isolation Voltage | 3000 VDC |
| Protection Class | IP20 |
| Mounting | DIN rail |
| Main Functions | Analog data acquisition, signal conditioning, Modbus communication |
| Maintenance & Cleaning | Clean with dry cloth; avoid solvents |
| Safety Precautions | Use in dry environment; disconnect power before servicing |
| Spare Parts & Repairability | Contact Advantech support for spare parts; not user-repairable |
| General Information | Complies with CE, FCC standards |
Frequently Asked Questions - ADAM-4019+ Advantech
How do I power the ADAM-4019+ module?
The module requires a DC power supply between 10 and 30 VDC. Connect the positive wire to the +VS terminal and the negative wire to the GND terminal.
What communication protocol does the ADAM-4019+ use?
It uses Modbus RTU over an RS-485 interface. The default baud rate is 9600 bps, 8 data bits, no parity, 1 stop bit.
How many analog input channels are available?
The ADAM-4019+ has 4 analog input channels that can be configured for voltage (0-10V) or current (4-20mA) signals.
Can I mount the module on a DIN rail?
Yes, the module is designed for DIN rail mounting. It snaps onto a standard 35 mm DIN rail.
What is the maximum cable length for RS-485 communication?
The maximum cable length for RS-485 at 9600 bps is approximately 1200 meters (4000 feet). Use twisted-pair shielded cable for best performance.
How do I configure the input range for each channel?
Configuration is done via DIP switches located on the module. Refer to the manual for switch settings corresponding to voltage or current modes.
Is the ADAM-4019+ isolated?
Yes, it provides 3000 VDC isolation between the input channels and the communication interface, protecting against ground loops.
What is the typical power consumption?
The typical power consumption is 1.2W (at 24 VDC). Maximum consumption is 2W.
Can I use the module with a PLC?
Yes, the ADAM-4019+ can be easily integrated with any PLC that supports Modbus RTU master capability over RS-485.
Where can I find the user manual?
The user manual is available on notice-facile.com in PDF format. You can download it for free from the product page.
User questions about ADAM-4019+ Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Module d'acquisition de données in PDF format for free! Find your manual ADAM-4019+ - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADAM-4019+ by Advantech.
USER MANUAL ADAM-4019+ Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : ADAM-4019+
Category : Module d'acquisition de données