Fun Factor LED - LED Lighting American Audio - Free user manual and instructions
Find the device manual for free Fun Factor LED American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Effect Light |
| Brand | American Audio |
| Model | Fun Factor LED |
| Dimensions (W x H x D) | 10 x 8 x 10 inches |
| Weight | 3.5 lbs |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| Light Source | RGB LEDs |
| Colors | Red, Green, Blue, and mixed colors |
| Operating Modes | Sound Active, Auto, Master/Slave, DMX |
| DMX Channels | 4 or 7 (selectable) |
| Control | DMX, IR Remote (included) |
| Mounting | Bracket with floor stand hole |
| Protection Rating | IP20 (indoor use only) |
| Safety Certifications | CE, RoHS |
| Maintenance | Clean with a dry cloth; do not use liquids |
| Spare Parts | LED modules available separately |
| Repairability | Replaceable LEDs and power supply unit |
| General Information | For professional and consumer use; indoor only |
Frequently Asked Questions - Fun Factor LED American Audio
How do I connect the Fun Factor LED to a DMX controller?
Use a standard 3-pin XLR cable. Connect the DMX input to the controller and set the DMX address via the dip switches or menu. Refer to the manual for channel mapping.
Can I use the fixture without DMX?
Yes. The Fun Factor LED has sound active and auto modes. Press the Mode button on the fixture or use the remote to select Sound Active or Auto Run.
How do I set the DMX address?
Use the dip switches on the back. DIP 1 to 9 set the address (binary). For address 1, set DIP 1 ON. Alternatively, use the menu and display to set address digitally.
Why is the light not responding to sound?
Ensure the fixture is in Sound Active mode. Adjust the sound sensitivity using the dial on the side. Also check that the built-in microphone is not blocked.
What is the maximum number of fixtures in master/slave mode?
You can link up to 32 fixtures in master/slave mode. Connect the master's DMX output to the slave's DMX input using XLR cables.
Can I mount the fixture upside down?
Yes, the bracket supports hanging or standing. Ensure the fixture is securely fastened and use a safety cable when hanging.
How do I clean the lens?
Use a soft, dry cloth. Avoid using any cleaning liquids or solvents as they may damage the lens optics.
What should I do if the light stops working?
Check the power supply and fuse. Try resetting the fixture by unplugging it for 10 seconds. If still not working, contact American Audio support.
Is the Fun Factor LED suitable for outdoor use?
No, it is rated IP20 for indoor use only. Do not expose it to rain or moisture.
What is included in the box?
The fixture, a power cord, an IR remote with battery, a mounting bracket, and a user manual.
User questions about Fun Factor LED American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your LED Lighting in PDF format for free! Find your manual Fun Factor LED - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fun Factor LED by American Audio.
USER MANUAL Fun Factor LED American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : Fun Factor LED
Category : LED Lighting