Fusion GMG8 - Commercial refrigerator Structural Concepts - Free user manual and instructions
Find the device manual for free Fusion GMG8 Structural Concepts in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerated Merchandiser / Display Case |
| Model | Fusion GMG8 |
| Brand | Structural Concepts |
| Dimensions (W x D x H) | 48.3 x 32.5 x 78.7 inches (122.7 x 82.6 x 200 cm) |
| Weight | 265 lbs (120 kg) |
| Power Supply | 115 V, 60 Hz, 10 A |
| Refrigerant | R-290 (environmentally friendly) |
| Temperature Range | 33°F to 41°F (0.5°C to 5°C) |
| Number of Doors | 2 sliding doors |
| Shelving | 4 adjustable wire shelves |
| Lighting | LED interior lighting with on/off switch |
| Control Type | Digital thermostat with temperature display |
| Defrost Type | Automatic electric defrost |
| Interior Material | Stainless steel |
| Exterior Finish | White painted steel |
| Noise Level | ≤ 52 dB(A) |
| Energy Consumption | 3.5 kWh/day (ENERGY STAR qualified) |
| Recommended Use | Beverages, dairy, deli products |
| Maintenance | Clean condenser monthly; replace door gaskets as needed |
| Safety Features | Automatic door closing; high-temperature alarm; leveling legs |
Frequently Asked Questions - Fusion GMG8 Structural Concepts
How do I set the temperature on the Fusion GMG8?
Press and hold the SET button on the digital controller for 3 seconds until the display flashes. Use the ▲ and ▼ buttons to adjust the desired temperature, then press SET again to confirm.
Why is my unit not cooling properly?
Check if the condenser coils are dirty (clean with a brush), ensure the door seals are intact, and verify that the temperature setpoint is not too high. Also allow 24 hours after initial startup for stabilization.
How often should I clean the condenser coils?
Every 30 days. Use a soft brush or vacuum to remove dust buildup. Blocked coils reduce cooling efficiency and may cause compressor failure.
Can I reverse the door opening direction?
No, the sliding doors on the Fusion GMG8 are not reversible. They are designed to slide in one direction only.
What type of refrigerant does this unit use?
It uses R-290 (propane), a natural refrigerant with low global warming potential. Always have a certified technician handle refrigerant repairs.
How do I replace a broken shelf?
Order a replacement shelf (part number SH-840) from Structural Concepts. Slide the shelf clips onto the vertical pilasters and ensure they lock securely.
The interior light is not working. What should I do?
First, check the light switch on the control panel. If still off, the LED driver may need replacement. Contact support for part LED-DRV-24V.
What is the recommended clearance around the unit?
Leave at least 4 inches (10 cm) at the back and sides for proper airflow, and 6 inches (15 cm) above for top ventilation. Blocked vents cause overheating.
Why is there water pooling inside the unit?
Check the defrost drain for clogs. Flush with warm water and a mild detergent. Also ensure the unit is level so water flows to the drain.
Where can I find the user manual or replacement parts?
The user manual is available for free download at notice-facile.com. For parts, contact Structural Concepts customer service or visit authorized dealers.
User questions about Fusion GMG8 Structural Concepts
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Commercial refrigerator in PDF format for free! Find your manual Fusion GMG8 - Structural Concepts and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fusion GMG8 by Structural Concepts.
USER MANUAL Fusion GMG8 Structural Concepts
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Structural Concepts
Model : Fusion GMG8
Category : Commercial refrigerator