RR-68-20 - Niveleuse de quai Vestil - Free user manual and instructions
Find the device manual for free RR-68-20 Vestil in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pallet Jack |
| Model Number | RR-68-20 |
| Brand | Vestil |
| Load Capacity | 6,800 lbs |
| Fork Length | 48 inches |
| Overall Length | 68 inches |
| Overall Width | 20.25 inches |
| Lowered Height | 3 inches |
| Raised Height | 7.5 inches |
| Weight | 265 lbs |
| Construction Material | Steel |
| Wheel Type | Polyurethane (2 steer, 2 load) |
| Steer Wheel Diameter | 7 inches |
| Load Wheel Diameter | 5 inches |
| Handle Type | Ergonomic with soft grip |
| Steering | 360° rotation |
| Hydraulic System | Self-contained with overload relief valve |
| Operation | Manual pump with foot pedal |
| Safety | Overload protection valve |
| Color | Orange / Yellow |
| Warranty | 1 year limited |
| Maintenance | Regular lubrication and inspection |
| Cleaning | Wipe with dry cloth, avoid solvents |
| Replacement Parts | Available from Vestil |
Frequently Asked Questions - RR-68-20 Vestil
What is the maximum load capacity of the Vestil RR-68-20?
The Vestil RR-68-20 has a maximum load capacity of 6,800 lbs. Always ensure the load is evenly distributed and does not exceed this limit.
How do I raise and lower the forks?
To raise the forks, pump the handle up and down. To lower, gently pull the release lever (usually located near the handle) to allow the hydraulic fluid to return to the reservoir.
What type of hydraulic fluid should I use?
Use ISO 32 or AW 32 hydraulic oil. Do not mix with other fluids. Check the oil level regularly and top up as needed.
How often should I lubricate the moving parts?
Lubricate all pivot points, wheels, and hydraulic cylinder every 3 months or after 200 hours of use to ensure smooth operation and longevity.
Can I use the pallet jack on uneven surfaces?
Yes, but exercise caution. The polyurethane wheels provide good grip on most surfaces. Avoid slopes exceeding 5° and ensure the load is stable.
What should I do if the forks won't raise?
First, check the hydraulic fluid level. If low, refill with the recommended oil. Also inspect the release valve for proper closure. If the problem persists, the pump may need servicing.
How do I replace the load wheels?
Loosen the axle nut using a wrench, remove the old wheel, and install the new one. Ensure the axle is properly aligned and tighten the nut securely. Refer to the manual for torque specs.
Is the pallet jack suitable for outdoor use?
Yes, but it is recommended for dry, level surfaces. Prolonged exposure to moisture may cause corrosion. Store indoors when not in use.
What safety precautions should I follow?
Always inspect the pallet jack before use. Never exceed the load capacity. Keep feet clear of the wheels. Use on level ground and ensure loads are stable.
How do I adjust the handle height?
The handle height is fixed on the RR-68-20. However, you can adjust the handle angle by loosening the adjustment knob (if equipped) to suit the operator's comfort.
User questions about RR-68-20 Vestil
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Niveleuse de quai in PDF format for free! Find your manual RR-68-20 - Vestil and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RR-68-20 by Vestil.
USER MANUAL RR-68-20 Vestil
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vestil
Model : RR-68-20
Category : Niveleuse de quai