Q-2422 MKII Limited - Audio Mixer American Audio - Free user manual and instructions
Find the device manual for free Q-2422 MKII Limited American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional DJ Mixer |
| Channels | 24 Channels |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.05% |
| Input Impedance | 10 kOhm (Line), 600 Ohm (Mic) |
| Output Impedance | 100 Ohm (Balanced) |
| Signal-to-Noise Ratio | > 90 dB |
| Crossfader | Replaceable, 45 mm travel |
| EQ | 3-band per channel (High, Mid, Low) |
| Power Supply | 100-240 VAC, 50/60 Hz, 30W |
| Dimensions (W x D x H) | 530 x 320 x 90 mm |
| Weight | 5.5 kg |
| Phono Input | 2x RCA, RIAA equalized |
| Microphone Input | 2x XLR/TRS combo |
| Master Output | 1x XLR balanced, 1x RCA unbalanced |
| Headphone Output | 1/4" TRS, 1/8" stereo |
| Cooling | Passive ventilation |
| Operating Temperature | 5°C to 40°C |
| Connectivity | USB for MIDI control (not audio) |
| Included Accessories | Power cable, user manual |
| Warranty | 1 year limited |
Frequently Asked Questions - Q-2422 MKII Limited American Audio
How do I connect turntables to the Q-2422 MKII?
Connect your turntables to the Phono Input using RCA cables. Ensure the ground wire is connected to the grounding terminal to eliminate hum.
Can I use this mixer with a computer?
The Q-2422 MKII has a USB port for MIDI control only, not for audio playback. Use the analog outputs to connect to your computer's audio interface.
What is the recommended cleaning procedure?
Unplug the mixer. Use a soft, dry cloth to wipe the surface. For stubborn dirt, slightly dampen the cloth with water. Avoid solvents or abrasive cleaners.
How do I replace the crossfader?
Unscrew the faceplate screws near the crossfader. Remove the old fader by gently pulling it out. Insert the new fader and tighten screws. Ensure it is compatible with the Q-2422 MKII.
Why is there no sound from the master output?
Check that the Master volume is turned up. Ensure the channel faders are up and the input source is selected. Also verify that the mute or cue buttons are not engaged.
Can I use the microphone and line inputs simultaneously?
Yes, each channel has independent input selection. Use Mic/Line switches per channel. Adjust gain accordingly to avoid distortion.
What is the maximum number of channels I can use?
The mixer has 24 channels, each with line/phone inputs. You can use all simultaneously, but be mindful of total power consumption.
How do I set up the EQ?
Each channel has a 3-band EQ. Adjust High (treble), Mid (midrange), and Low (bass) to shape the sound. Use neutral (12 o'clock) as a starting point.
Is the mixer compatible with 75 ohm RCAs?
Yes, standard RCA cables are fine. The inputs are designed for high impedance sources, so 75 ohm cables work for line-level connections.
Where can I get spare parts?
Contact American Audio customer support or an authorized dealer. Common spare parts like faders, knobs, and power supplies are available.
User questions about Q-2422 MKII Limited American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Mixer in PDF format for free! Find your manual Q-2422 MKII Limited - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Q-2422 MKII Limited by American Audio.
USER MANUAL Q-2422 MKII Limited American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : Q-2422 MKII Limited
Category : Audio Mixer