SDAT-MHS-M160-1L-SA-E-0.3-M8 - Position sensor Festo - Free user manual and instructions
Find the device manual for free SDAT-MHS-M160-1L-SA-E-0.3-M8 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Position Sensor for Pneumatic Cylinders |
| Brand | Festo |
| Model | SDAT-MHS-M160-1L-SA-E-0.3-M8 |
| Measuring Range | 160 mm |
| Output Type | PNP, Normally Open |
| Supply Voltage | 10 – 30 V DC |
| Current Consumption | < 20 mA |
| Connection | M8x1, 3-pin, 0.3 m cable |
| Protection Class | IP65 / IP67 |
| Ambient Temperature | -10 °C to +60 °C |
| Material (Housing) | High-strength engineering plastic |
| Weight | Approx. 50 g |
| Repeat Accuracy | ±0.1 mm |
| Switching Frequency | Up to 1 kHz |
| Short-Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
Frequently Asked Questions - SDAT-MHS-M160-1L-SA-E-0.3-M8 Festo
What is the operating voltage range of the Festo SDAT-MHS-M160?
The sensor operates on 10 to 30 V DC. Ensure your power supply is within this range.
What output type does this sensor provide?
It provides a PNP normally open (NO) switching output.
How is the sensor connected?
It comes with a 0.3-meter cable terminated with an M8x1, 3-pin male connector.
Can this sensor be used with cylinders other than Festo?
Yes, the sensor is compatible with most pneumatic cylinders having a T-slot for mounting, provided the slot profile matches.
What is the maximum sensing distance?
The sensor has a measuring range of 160 mm, meaning it can detect position along that travel.
Is the sensor protected against dust and water?
Yes, it has an IP65/IP67 protection rating, making it suitable for industrial environments.
What is the ambient temperature range?
It can operate reliably in temperatures from -10 °C to +60 °C.
How do I mount the sensor?
The sensor fits into the T-slot of the cylinder and can be secured with the included mounting screws or clamps. Tighten to the specified torque (typically 0.5 Nm).
What does the LED indicator show?
A green LED indicates power on, and a yellow LED lights when the sensor is within the detection range.
How do I troubleshoot if the sensor doesn't switch?
Check the supply voltage, verify wiring polarity, ensure the sensor is within range of the piston, and confirm the output load is compatible (max 100 mA). Also inspect for mechanical damage.
User questions about SDAT-MHS-M160-1L-SA-E-0.3-M8 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Position sensor in PDF format for free! Find your manual SDAT-MHS-M160-1L-SA-E-0.3-M8 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDAT-MHS-M160-1L-SA-E-0.3-M8 by Festo.
USER MANUAL SDAT-MHS-M160-1L-SA-E-0.3-M8 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : SDAT-MHS-M160-1L-SA-E-0.3-M8
Category : Position sensor