TPatch - Splitter ART - Free user manual and instructions
Find the device manual for free TPatch ART in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Distribution Amplifier |
| Input Type | Balanced XLR/TRS Combo |
| Output Type | Balanced XLR (4 outputs) |
| Number of Channels | 1 input to 4 outputs |
| Frequency Response | 20 Hz – 20 kHz ±0.5 dB |
| Gain | Adjustable, up to +6 dB |
| Power Supply | 9V DC external adapter (100-240V AC included) |
| Dimensions (WxHxD) | 8.5" x 1.75" x 6" (half-rack, 1U) |
| Weight | 2.5 lbs |
| Construction | Steel chassis, black finish |
| Indicators | Power LED, Signal Present LED per channel |
| Controls | Power switch, input gain trim pot |
| Ground Lift | Yes, switchable |
| Phantom Power | Not supported |
| Cooling | Passive, no fan |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Power adapter, rack ears, user manual |
| Warranty | 1 year limited |
| Certification | CE, RoHS |
Frequently Asked Questions - TPatch ART
What type of cables are needed for the TPatch?
Use balanced XLR or TRS cables for inputs and XLR for outputs. Unbalanced cables may cause hum or signal loss.
Can I use the TPatch with a microphone preamp?
Yes, the TPatch accepts line-level signals. For microphone signals, use a preamp first.
How do I connect multiple TPatch units?
You can daisy-chain by connecting an output of one unit to the input of another using a standard XLR cable.
Does the TPatch require phantom power?
No, the TPatch does not provide or require phantom power. Use external phantom power if needed.
What is the purpose of the ground lift switch?
The ground lift switch helps eliminate ground loop hum by isolating the signal ground from the chassis ground.
Can I rack-mount the TPatch?
Yes, the TPatch is half-rack width and includes rack ears for mounting in a standard 19-inch rack.
What is the maximum input voltage?
The maximum input level is approximately +22 dBu before clipping.
How do I clean the TPatch?
Disconnect power and use a dry, lint-free cloth. Avoid liquids or sprays.
Why is there no signal on one output?
Check the input connection, ensure the device is powered on, and verify the gain setting. If the issue persists, try swapping cables.
Is the TPatch compatible with digital signals?
No, the TPatch is designed for analog audio only. Use a dedicated digital distribution amplifier for AES/EBU or SPDIF.
User questions about TPatch ART
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Splitter in PDF format for free! Find your manual TPatch - ART and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TPatch by ART.
USER MANUAL TPatch ART
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ART
Model : TPatch
Category : Splitter