Salton

HP-10C - Hob Salton - Free user manual and instructions

Find the device manual for free HP-10C Salton in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Salton HP-10C - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Heater
Brand Salton
Model HP-10C
Dimensions (H x W x D) 11.8 x 7.9 x 5.9 in (30 x 20 x 15 cm)
Weight 2.65 lbs (1.2 kg)
Power Rating 1500W, 120V
Heating Element Ceramic
Heat Settings High, Low, Fan Only
Thermostat Adjustable
Safety Features Overheat protection, Tip-over switch
Housing Material Plastic
Noise Level Quiet operation
Coverage Area Up to 150 sq ft (14 m²)
Certifications UL Listed
Cord Length 6 ft (1.8 m)
Care & Cleaning Wipe with dry cloth; do not immerse
Repairability Contact professional service
Warranty 1 year limited
Included Items Heater, user manual

Frequently Asked Questions - HP-10C Salton

How do I set the desired temperature on the Salton HP-10C heater?
Rotate the thermostat knob clockwise to increase the temperature setting. The heater will cycle on and off to maintain the selected room temperature.
Can I use the heater in a bathroom?
No, this heater is designed for indoor dry locations only. Do not use in humid environments like bathrooms or wet areas to avoid electrical hazards.
What should I do if the heater shuts off unexpectedly?
Check if the overheat protection or tip-over switch activated. Ensure the heater is on a flat, stable surface and not obstructed. Allow it to cool down, then restart.
How often should I clean the heater?
Clean the exterior with a dry cloth every few weeks. Do not use liquids or immerse. Ensure the unit is unplugged before cleaning.
Does the HP-10C produce a strong odor when first used?
A slight odor may occur during initial use due to the heating element burning off dust from manufacturing. This is normal and should dissipate after a few minutes.
Can I leave the heater unattended overnight?
It is recommended to always remain present when the heater is in operation. For safety, never leave it unattended for extended periods, especially while sleeping.
What is the difference between High and Low settings?
High setting uses maximum power (1500W) for rapid heating. Low setting uses reduced power (typically 750W) for more energy-efficient, milder warmth.
The heater makes a clicking noise. Is this normal?
Yes, clicking sounds are normal as the thermostat turns the heating element on and off to regulate temperature. If noise is excessive, check for loose parts.
How do I store the heater during summer?
Clean the unit, allow it to dry completely, and store in a cool, dry place away from sunlight. Keep the cord neatly wrapped and avoid placing heavy items on top.
Does the heater have a filter that needs replacement?
No, the HP-10C does not feature a washable or replaceable filter. All maintenance is limited to external cleaning as described in the manual.

User questions about HP-10C Salton

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hob in PDF format for free! Find your manual HP-10C - Salton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HP-10C by Salton.

USER MANUAL HP-10C Salton

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Salton

Model : HP-10C

Category : Hob