3093 TSM - Electrical switch JUNG - Free user manual and instructions
Find the device manual for free 3093 TSM JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Touch Sensor Switch/Dimmer |
| Model | 3093 TSM |
| Brand | JUNG |
| Material | Plastic (thermoplastic), stainless steel or aluminum frame (optional) |
| Dimensions (HxWxD) | Approx. 70 x 70 x 30 mm |
| Weight | Approx. 100 g |
| Operating Voltage | 230 V AC, 50 Hz |
| Rated Current | 10 A (resistive load) |
| Load Types | Incandescent, halogen, LED, CFL, inductive (e.g., fans) |
| Switching Function | On/Off, dimming, scene control (via touch) |
| Touch Technology | Capacitive touch sensor pad |
| Control Interface | Single touch (on/off), long press (dimming) |
| Memory Function | Last dim level retained |
| Minimum Load | Typically 5 W for LED, 20 W for halogen |
| Protection Rating | IP20 (indoor use) |
| Operating Temperature | -5°C to +45°C |
| Certifications | CE, RoHS |
| Warranty | 2 years (manufacturer) |
| Installation | Flush mounting in standard wall box (60 mm deep) |
| Connection Terminal | Screw terminals for 1.5-2.5 mm² wire |
| Compatibility | Suitable for JUNG system 55, A 500, etc. |
Frequently Asked Questions - 3093 TSM JUNG
How do I install the JUNG 3093 TSM switch?
First, disconnect power. Connect the live wire (L) and neutral (N) to the corresponding terminals. Ensure the load is connected between the switch and the live wire. Flush mount in a standard wall box (60mm deep). Screw the device into the frame and attach the cover plate. Restore power and test.
Can I use the 3093 TSM with LED bulbs?
Yes, it supports LED bulbs. However, ensure the LED load is compatible with dimmable LEDs and check the minimum load requirement (typically 5W). Some LEDs may flicker if not suitable.
How do I reset the touch sensor?
To reset, turn off power for 10 seconds, then turn it back on. The device will restore factory settings. Alternatively, a long press (10 seconds) during operation may trigger a reset.
What is the maximum load for the 3093 TSM?
The maximum load is 10 A (resistive). For inductive loads like motors, it's lower (e.g., 2 A). For LED, the maximum is typically 200W (depending on brand). Check the manual for exact derating.
Does the switch have a memory function?
Yes, the dimmer remembers the last dimming level. When you turn it on again, it returns to that level. This feature can be disabled by a specific sequence (see manual).
Can I pair the 3093 TSM with a scene controller?
This model is a standalone touch sensor. It does not support multi-way control or scene controllers without additional JUNG components (e.g., 3094 TSM). It can be used as a single-pole switch.
What should I do if the touch sensor is unresponsive?
Check power supply. If the device has power, try resetting. If still unresponsive, it may be defective. Contact JUNG support or a qualified electrician.
Is the 3093 TSM suitable for outdoor use?
No, it has an IP20 rating, meaning it's only for indoor use. It should be installed in dry, dust-free environments. For outdoor, use a weatherproof enclosure.
How do I clean the touch surface?
Use a soft, dry cloth. Do not use abrasive cleaners or liquids that could enter the device. For stubborn dirt, slightly dampen the cloth with water.
Where can I find the user manual?
You can download the PDF manual from notice-facile.com or the JUNG official website. Use the QR code on the device packaging or search for 'JUNG 3093 TSM manual'.
User questions about 3093 TSM JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electrical switch in PDF format for free! Find your manual 3093 TSM - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3093 TSM by JUNG.
USER MANUAL 3093 TSM JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : 3093 TSM
Category : Electrical switch