ProPar 56RGB - Audio Equipment American Audio - Free user manual and instructions
Find the device manual for free ProPar 56RGB American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Brand | American Audio |
| Model | ProPar 56RGB |
| LED Type | 56x 3W RGB SMD LEDs |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 60W |
| Dimensions (L x W x H) | 6.5 x 5.5 x 5.0 inches |
| Weight | 2.2 lbs |
| DMX Channels | 4 or 7 channels (selectable) |
| Control Modes | DMX, Master/Slave, Sound Active, Auto Run |
| Beam Angle | 25 degrees |
| Housing Material | Aluminum die-cast |
| IP Rating | IP20 (indoor use only) |
| Cooling | Convection cooling (no fan) |
| Safety Certification | CE, RoHS |
| Included Accessories | Power cord, DMX cable, mounting bracket |
| Cleaning & Maintenance | Wipe with dry cloth; avoid solvents |
| Repairability | LED modules replaceable by qualified technician |
Frequently Asked Questions - ProPar 56RGB American Audio
How do I set the DMX address on the ProPar 56RGB?
Use the DMX dip switches on the back. Set the address using binary values (dip 1=1, dip 2=2, dip 3=4, etc.). Refer to the manual for address mapping.
Can I use this light without a DMX controller?
Yes, use the built-in sound active or auto run modes. The built-in microphone will trigger color changes to music or cycle through preset programs.
What is the maximum number of units in a master/slave chain?
You can link up to 32 units in a master/slave configuration. Set one unit as master (no DMX input) and others as slave with same DMX address.
How do I clean the ProPar 56RGB?
Disconnect power and let it cool. Wipe the housing with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth with mild soap. Avoid abrasive cleaners.
What power cord does it use?
It uses a standard IEC power cord (C13 connector). Voltage range is 100-240V so it works worldwide with the appropriate cord.
Can I replace the LEDs if they burn out?
Yes, but it requires opening the unit. LEDs are soldered on boards; replacement should be done by a qualified technician to avoid damage.
What is the beam angle and how does it affect coverage?
The beam angle is 25 degrees, providing a medium narrow beam suitable for accent lighting or stage wash from a distance.
Is the ProPar 56RGB suitable for outdoor use?
No, it has an IP20 rating, meaning it is not weatherproof. Use only indoors or in dry, covered areas.
How do I reset the light to factory settings?
Press and hold the Mode button for 3 seconds while powering on. The unit will reset to default settings.
Does the unit support sound active mode with a microphone?
Yes, it has a built-in microphone that senses ambient sound. Sensitivity can be adjusted via a rotary knob on the back.
User questions about ProPar 56RGB American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Equipment in PDF format for free! Find your manual ProPar 56RGB - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProPar 56RGB by American Audio.
USER MANUAL ProPar 56RGB American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : ProPar 56RGB
Category : Audio Equipment