Kompass FX3 Pro - Processor NovaStar - Free user manual and instructions
Find the device manual for free Kompass FX3 Pro NovaStar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Display Processor |
| Brand | NovaStar |
| Model | Kompass FX3 Pro |
| Dimensions (W x H x D) | 480 mm x 45 mm x 300 mm (1U rackmount) |
| Weight | 5 kg |
| Power Supply | AC 100-240V, 50/60Hz, 150W |
| Input Ports | 4x HDMI 2.0, 2x DisplayPort 1.2, 1x 3G-SDI |
| Output Ports | 4x Ethernet (RJ45) for LED panels |
| Max Resolution | 1920x1080@60Hz per output, total up to 8K |
| Video Processing | 10-bit, HDR, scaling, frame synchronization |
| Control Methods | Front panel buttons, RS232, Ethernet, USB |
| Cooling | Active fan cooling |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, FCC, RoHS |
| Maintenance | Regular dust cleaning; firmware updates via USB |
| Safety | Overvoltage protection, thermal protection |
| Spare Parts Available | Power supply unit, fans, connectors, control boards |
| Repairability | Modular design; field-replaceable modules |
| General | Includes user manual, 2-year warranty |
Frequently Asked Questions - Kompass FX3 Pro NovaStar
How do I connect the Kompass FX3 Pro to my LED panels?
Connect the processor's Ethernet output ports to the LED panel hubs using CAT6 cables. Ensure all panels are configured as a single screen in the NovaStar software.
What should I do if there is no video output?
Check that the input source is powered and correctly connected. Verify the EDID settings in the processor menu. Try a different input port or cable. Reset the device by holding the reset button for 5 seconds.
How can I update the firmware on my Kompass FX3 Pro?
Download the latest firmware from the NovaStar website. Copy the .bin file to a USB drive, insert it into the processor's USB port, and navigate to System > Firmware Update via the front panel.
What is the maximum supported resolution?
Each output supports up to 1920x1080@60Hz, and the total combined output can reach up to 8K (7680x4320) depending on the source and configuration.
Can I use the Kompass FX3 Pro with third-party LED panels?
Yes, as long as the panels support standard Novastar receiving cards (like A5s, A8s). You may need to adjust the LED panel parameters in the setup software.
How do I perform a factory reset?
Go to System > Factory Reset in the on-screen menu and confirm. Alternatively, power off the device, press and hold the 'Menu' button, then power on until the reset message appears.
The device is overheating. What should I do?
Ensure the ventilation slots are not blocked. Clean any dust from the fans using compressed air. Check that the ambient temperature is within the 0-40°C range. If the issue persists, contact support for fan replacement.
What are the recommended maintenance intervals?
Clean the device every 3 months. Check and update firmware every 6 months. Inspect cables and connectors annually for wear.
How can I adjust brightness and color settings?
Use the Novastar software (like NovaLCT or V-Nova) connected via Ethernet. You can adjust gamma, color temperature, and individual RGB gains for each output.
Where can I find spare parts for the Kompass FX3 Pro?
Spare parts such as power supplies and fan modules are available through NovaStar distributors. Contact your local dealer or visit the official NovaStar website for authorized parts.
User questions about Kompass FX3 Pro NovaStar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual Kompass FX3 Pro - NovaStar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Kompass FX3 Pro by NovaStar.
USER MANUAL Kompass FX3 Pro NovaStar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NovaStar
Model : Kompass FX3 Pro
Category : Processor