55600-7 - Slicer Nemco - Free user manual and instructions
Find the device manual for free 55600-7 Nemco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Food Slicer |
| Brand | Nemco |
| Model | 55600-7 |
| Dimensions (Approx.) | 22 x 18 x 16 inches |
| Weight (Approx.) | 35 lbs |
| Power Supply | 120 V, 60 Hz, 5 A |
| Blade Diameter | 10 inches |
| Max Slicing Thickness | 1 inch |
| Construction Material | Anodized aluminum and stainless steel |
| Carriage Travel | 12 inches |
| Slice Adjustment | Stepless knob with graduated dial |
| Safety Features | Blade guard, meat pusher, on/off switch with key lock |
| Cleaning | Removable carriage and blade for easy cleaning |
| Maintenance | Regular blade sharpening and lubrication of moving parts |
| Spare Parts Available | Blade, sharpener, carriage assembly, pusher |
| Repairability | Modular design for easy part replacement |
| General Information | Designed for commercial use, meets NSF standards |
Frequently Asked Questions - 55600-7 Nemco
How do I sharpen the blade on my Nemco 55600-7?
The blade can be sharpened using the built-in sharpener. Remove the blade guard, activate the sharpener for a few seconds, then clean off any metal shavings. Refer to the manual for detailed steps.
Can I slice frozen meat with this slicer?
No, this slicer is designed for fresh or thawed meat only. Slicing frozen meat can damage the blade and motor.
What is the maximum thickness setting?
The maximum slicing thickness is 1 inch (25 mm). The thickness knob adjusts steplessly.
How do I clean the slicer?
Unplug the slicer. Remove the carriage and blade. Wash these parts with warm soapy water and dry thoroughly. Wipe the base with a damp cloth. Do not immerse the motor housing.
The blade is not turning. What could be wrong?
Check if the power cord is plugged in, the safety switch is engaged, and the key lock is in the 'on' position. If the motor still doesn't run, consult a technician.
How often should I lubricate the slicer?
Lubricate the carriage rods and moving parts every 50 hours of use with food-grade mineral oil.
Where can I purchase replacement parts?
Replacement parts such as blades, sharpeners, and carriage assemblies are available from Nemco authorized dealers or online.
Is the slicer NSF certified?
Yes, the Nemco 55600-7 meets NSF/ANSI Standard 8 for commercial food equipment.
What type of oil should I use on the blade?
Only use food-grade mineral oil for blade and moving parts. Do not use vegetable oil as it can gum up.
My slices are uneven. How can I fix this?
Ensure the blade is sharp and properly aligned. Also check that the carriage moves smoothly and the thickness adjustment is set correctly. Adjust if necessary.
User questions about 55600-7 Nemco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Slicer in PDF format for free! Find your manual 55600-7 - Nemco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 55600-7 by Nemco.
USER MANUAL 55600-7 Nemco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nemco
Model : 55600-7
Category : Slicer