Hero Spot 60 - Lighting Varytec - Free user manual and instructions
Find the device manual for free Hero Spot 60 Varytec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spot Light |
| Model | Hero Spot 60 |
| Brand | Varytec |
| Light Source | 60W LED |
| Beam Angle | 15° |
| Color Wheel | 7 colors + white |
| Gobo Wheel | 7 gobos + open |
| Pan | 540° |
| Tilt | 270° |
| DMX Channels | 18 |
| Control | DMX512, Master/Slave, Sound Active, Auto |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 80W |
| Dimensions | 250 x 240 x 340 mm |
| Weight | 6 kg |
| Housing | Metal, black |
| Cooling | Fan |
| Protection Rating | IP20 |
| Mounting | Omega brackets |
| Fuse | T2A 250V |
| Maintenance | Clean lens regularly with dry cloth |
| Safety | Ensure correct voltage; do not expose to rain |
Frequently Asked Questions - Hero Spot 60 Varytec
How do I connect the fixture to a DMX controller?
Use a standard 3-pin XLR cable. Connect the DMX output of the controller to the DMX input of the fixture. Set the DMX address using the control panel. Ensure proper termination with a 120 ohm resistor at the last fixture.
What is the power consumption of the Hero Spot 60?
The maximum power consumption is 80W. The fixture operates on AC 100-240V, 50/60Hz.
How do I reset the fixture?
Press the Menu button to access settings, navigate to 'Reset' and confirm. Alternatively, power cycle the fixture by unplugging it for a few seconds.
Can I use the fixture outdoors?
No, the fixture has an IP20 rating and is designed for indoor use only. Keep it away from water, moisture, and extreme temperatures.
How do I replace the fuse?
Disconnect power. Locate the fuse holder near the power input. Open it and replace the blown fuse with a T2A 250V fuse of the same type.
What type of cable is needed for DMX?
Use a shielded DMX cable with 3-pin XLR connectors. Belden 8102 or equivalent is recommended. Avoid using standard microphone cables.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Gently wipe the lens in a circular motion. Do not use abrasive materials.
What is the maximum ambient temperature?
The maximum ambient temperature for safe operation is 40°C (104°F). Avoid operating in direct sunlight or near heat sources.
How do I set the DMX address?
Press Menu, select 'DMX Address', use the Up/Down buttons to set the desired address (from 1 to 512), and press Enter to confirm. The display shows the current address.
There is no light output; what should I check?
First, ensure the fixture is powered on and the mains cable is connected. Check the fuse. Verify DMX cable connections and that the controller is transmitting. In stand-alone mode, confirm the fixture is not in sound-active or auto mode with a blackout scene.
User questions about Hero Spot 60 Varytec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Hero Spot 60 - Varytec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hero Spot 60 by Varytec.
USER MANUAL Hero Spot 60 Varytec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Varytec
Model : Hero Spot 60
Category : Lighting