Source Four 36° Profile - Lamp ETC - Free user manual and instructions
Find the device manual for free Source Four 36° Profile ETC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ellipsoidal Reflector Spotlight (Profile) |
| Brand | ETC |
| Model | Source Four 36° Profile |
| Beam Angle | 36° |
| Lamp Type | HPL 575W (High Performance Lamp) |
| Power Consumption | 575 W |
| Voltage | 120V or 230V (depending on model) |
| Dimensions (L x W x H) | Approx. 25 x 12 x 12 in (635 x 305 x 305 mm) |
| Weight | 10.5 lb (4.8 kg) |
| Lens Diameter | 6.25 in (159 mm) |
| Safety Features | Safety cable attachment point; thermal protection; grounded plug |
| Cleaning Instructions | Use a soft, dry cloth for exterior; lens may be cleaned with approved glass cleaner |
| Maintenance | Periodically check lamp and lens for damage; replace lamp as needed |
| Spare Parts | Lamp (HPL 575W), lens, reflector, gel frame, yoke, lamp cap |
| Repairability | Modular design allows easy replacement of major components |
| Included Accessories | Gel frame, lamp, user manual |
Frequently Asked Questions - Source Four 36° Profile ETC
How do I replace the lamp in my Source Four 36° Profile?
Disconnect power, allow lamp to cool. Open the lamp cap, remove the old lamp, and insert a new HPL 575W lamp. Avoid touching the glass with bare hands.
What is the correct gel frame size for this fixture?
The Source Four 36° accepts a standard 7.5-inch gel frame (glass frame for gobos).
How do I adjust the focus and beam angle?
Loosen the focus knob on the barrel and slide the lens assembly forward or backward to adjust sharpness. The 36° beam angle is fixed by the barrel; use an alternate barrel for other angles.
Can I use an LED lamp instead of the HPL?
Yes, ETC offers the Source Four LED series retrofit, but the standard fixture is designed for HPL lamps. Use only ETC-approved LED replacements.
How do I clean the lens and reflector?
Use a soft, lint-free cloth with isopropyl alcohol for stubborn residue. Avoid abrasive cleaners that may damage the coating.
What safety precautions should I take when using the fixture?
Always use a safety cable attached to the fixture. Keep flammable materials away. Ensure proper ventilation. Do not exceed rated lamp wattage.
How do I install a gobo in the Source Four?
Open the gel frame holder, insert the gobo into a gobo holder (metal or glass), and slide it into the slot near the lens. Secure the gel frame holder.
What is the recommended replacement interval for the lamp?
Replace the lamp after 300 hours of use to avoid sudden failure and maintain consistent output.
Can I dim the Source Four Profile with standard dimmers?
Yes, the HPL lamp is dimmable with standard phase-control dimmers. For LED, use an appropriate LED driver.
Where can I find the user manual?
The manual is available for free download on notice-facile.com and the ETC website in PDF format.
User questions about Source Four 36° Profile ETC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual Source Four 36° Profile - ETC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Source Four 36° Profile by ETC.
USER MANUAL Source Four 36° Profile ETC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ETC
Model : Source Four 36° Profile
Category : Lamp