FabCore FC-3802 - Uncategorized LUCIDA - Free user manual and instructions
Find the device manual for free FabCore FC-3802 LUCIDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Label Printer |
| Model | FabCore FC-3802 |
| Dimensions | 210 x 160 x 120 mm |
| Weight | 1.3 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 24 W (max) |
| Print Resolution | 203 dpi |
| Print Speed | Up to 60 mm/s |
| Max Label Width | 50 mm |
| Connectivity | USB 2.0 (Type B) |
| Display | LCD 128 x 64 pixels |
| Supported Languages | English, French, German, Spanish, Italian |
| Functions | Print barcodes, QR codes, text, graphics |
| Media Types | Continuous, die-cut, fanfold labels |
| Maintenance | Clean print head with alcohol swab after each tape roll |
| Safety Certifications | CE, FCC, RoHS |
| Included Accessories | Power adapter, USB cable, quick start guide |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Warranty | 1 year limited |
Frequently Asked Questions - FabCore FC-3802 LUCIDA
How do I load a label roll into the FabCore FC-3802?
Open the top cover, remove the empty core, insert a new label roll with the labels facing down, and feed the leader under the print head. Close the cover and press the feed button to calibrate.
Why is my printer not printing?
Check that the power adapter is connected, the USB cable is secure, and the label roll is properly loaded. Also ensure the print head is clean and the printer is not in pause mode.
How do I clean the print head?
Turn off the printer, wait for the print head to cool, then gently wipe it with a cotton swab moistened with isopropyl alcohol. Do not use abrasive materials.
What software is compatible with this printer?
The FabCore FC-3802 works with the LUCIDA LabelStudio software (Windows/Mac) and can also be used via standard ESC/POS commands for custom integration.
Can I print barcodes?
Yes, the printer supports 1D barcodes (Code 39, Code 128, EAN-13, etc.) and 2D codes (QR, Data Matrix). Use the built-in functions or software templates.
What label sizes are supported?
The printer accepts label rolls up to 50 mm wide, with outer diameter up to 120 mm. Common sizes include 40x30 mm, 50x30 mm, and 25x25 mm.
How do I reset the printer to factory settings?
Turn off the printer, then press and hold the feed button while turning it on. Continue holding for 5 seconds until the display shows 'Reset OK'.
Why are my labels printing incorrectly (blurry, misaligned)?
Ensure the label roll is correctly aligned against the side guides. Run the auto-calibration from the printer menu. If still blurry, clean the print head.
What is the maximum print length?
For continuous labels, the maximum print length is 1000 mm. For die-cut labels, it is limited by the label length.
How do I replace the cutting blade?
Turn off and unplug the printer. Open the side panel, remove the cutting unit, and replace the blade cartridge with a new one (part number LC-01). Reassemble in reverse order.
User questions about FabCore FC-3802 LUCIDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FabCore FC-3802 - LUCIDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FabCore FC-3802 by LUCIDA.
USER MANUAL FabCore FC-3802 LUCIDA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LUCIDA
Model : FabCore FC-3802
Category : Uncategorized