X-STROBE IP - Uncategorized Brighter - Free user manual and instructions
Find the device manual for free X-STROBE IP Brighter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Strobe Light |
| Brand | Brighter |
| Model | X-STROBE IP |
| Dimensions (approx.) | 200 x 150 x 100 mm |
| Weight (approx.) | 1.3 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30 W |
| Strobe Rate | 1-20 flashes per second |
| Light Source | LED (white) |
| Beam Angle | 120° |
| IP Rating | IP66 (weatherproof) |
| Mounting | Bracket with screws (included) |
| Control | Manual on/off, speed dial |
| Remote Control | Not included |
| Operating Temperature | -20°C to +50°C |
| Housing Material | Aluminum + tempered glass |
| Protection Features | Overheat protection, surge protection |
| Installation | Wall or ceiling mount (hardware included) |
| Maintenance | Clean with soft dry cloth; avoid solvents |
| Spare Parts | Power adapter, mounting bracket available from Brighter |
| Repairability | User-serviceable: fuse replacement; otherwise contact support |
| Certifications | CE, RoHS |
| Package Contents | Strobe light, mounting bracket, screws, user manual |
Frequently Asked Questions - X-STROBE IP Brighter
How do I mount the X-STROBE IP?
Use the included mounting bracket and screws. Attach the bracket to a sturdy wall or ceiling, then slide the light onto the bracket and tighten the locking screws. Ensure the unit is securely fastened.
Can I use this strobe light outdoors?
Yes, the X-STROBE IP has an IP66 rating, meaning it is protected against powerful water jets and dust. It is suitable for outdoor use in rain or snow.
How do I adjust the strobe speed?
Turn the speed dial on the back of the unit to increase or decrease the flash rate. The range is from 1 to 20 flashes per second.
What power supply does it require?
It operates on AC 100-240V, 50/60Hz. The power cord is included. Do not use with a DC power source.
How do I clean the strobe light?
Use a soft, dry cloth to wipe the exterior. For stubborn dirt, slightly dampen the cloth with water. Do not use solvents or abrasive cleaners as they may damage the lens.
What should I do if the light stops working?
First, check the fuse (located inside the power input compartment). If blown, replace with the same type. If the fuse is intact, contact Brighter support.
Is remote control available?
No, the X-STROBE IP does not include a remote control. It is controlled manually via the on/off switch and speed dial on the unit.
What is the beam angle of this strobe?
The beam angle is 120 degrees, providing wide coverage suitable for large areas.
Can I replace the LED bulb?
The LED is integrated and not user-replaceable. If the LED fails, the entire unit may need replacement. Contact Brighter for warranty options.
How do I connect multiple strobe lights?
The X-STROBE IP does not support daisy-chaining. Each unit must be connected separately to a power source.
User questions about X-STROBE IP Brighter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual X-STROBE IP - Brighter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X-STROBE IP by Brighter.
USER MANUAL X-STROBE IP Brighter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brighter
Model : X-STROBE IP
Category : Uncategorized