HXM800.2D - Receiver Diamond Audio - Free user manual and instructions
Find the device manual for free HXM800.2D Diamond Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Channel Car Audio Amplifier |
| Model | HXM800.2D |
| Brand | Diamond Audio |
| Power Output (RMS) | 200W x 2 @ 4 ohms; 400W x 2 @ 2 ohms; 800W x 1 @ 4 ohms bridged |
| Total Peak Power | 1600W |
| Frequency Response | 10 Hz - 30 kHz |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.05% |
| Input Sensitivity | 200 mV - 8V |
| Impedance | 2 - 8 ohms (stable at 2 ohms stereo, 4 ohms mono) |
| Number of Channels | 2 |
| Low Pass Filter | 50 Hz - 250 Hz, 12 dB/octave |
| High Pass Filter | 15 Hz - 250 Hz, 12 dB/octave |
| Bass Boost | 0 - 12 dB at 45 Hz |
| Inputs | 2 x RCA |
| Outputs | 2 pairs of speaker terminals |
| Dimensions (W x L x H) | 10.2 x 7.5 x 2.1 inches (259 x 191 x 53 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | 12V DC (10-16V) |
| Fuse Rating | 40A x 1 |
| Protection Circuitry | Thermal, over-current, short circuit, DC offset |
| Mounting | Surface mount with included screws |
| Warranty | 1 year limited |
Frequently Asked Questions - HXM800.2D Diamond Audio
What is the RMS power output of the Diamond Audio HXM800.2D?
The RMS power output is 200W x 2 at 4 ohms, 400W x 2 at 2 ohms, and 800W x 1 when bridged at 4 ohms.
Can I bridge the HXM800.2D to power a subwoofer?
Yes, the amplifier can be bridged to deliver 800W RMS at 4 ohms, making it suitable for a single subwoofer.
What is the recommended fuse size for the HXM800.2D?
The amplifier requires a 40A fuse on the power wire.
Does the HXM800.2D have a bass boost feature?
Yes, it has a variable bass boost from 0 to 12 dB at 45 Hz.
What are the dimensions of the HXM800.2D?
The dimensions are 10.2 inches wide, 7.5 inches long, and 2.1 inches high (259 x 191 x 53 mm).
Is the HXM800.2D stable at 2 ohms?
Yes, it is stable at 2 ohms per channel in stereo mode.
What type of filters does the HXM800.2D have?
It has a low-pass filter (50-250 Hz) and a high-pass filter (15-250 Hz), both 12 dB/octave.
How should I clean the amplifier?
Disconnect power and wipe with a dry cloth. Avoid liquids or abrasive cleaners.
Does the HXM800.2D have protection circuits?
Yes, it includes thermal, over-current, short circuit, and DC offset protection.
What is the input sensitivity range?
The input sensitivity is adjustable from 200mV to 8V.
User questions about HXM800.2D Diamond Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HXM800.2D - Diamond Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HXM800.2D by Diamond Audio.
USER MANUAL HXM800.2D Diamond Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Diamond Audio
Model : HXM800.2D
Category : Receiver