PL1000-100PES - Powerline Adapter NETGEAR - Free user manual and instructions
Find the device manual for free PL1000-100PES NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powerline Adapter (Kit of 2 units) |
| Data Transfer Rate | Up to 1000 Mbps (HomePlug AV2) |
| Ethernet Ports | 1 x Gigabit Ethernet (10/100/1000) per unit |
| Power Supply | 100-240V AC, 50/60 Hz |
| Dimensions (each unit) | 110 x 65 x 38 mm (4.33 x 2.56 x 1.50 in) |
| Weight (each unit) | 150 g (5.29 oz) |
| Security | 128-bit AES encryption with Pairing Button |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% non-condensing |
| Indicators | Power, Ethernet, Powerline Link/Activity |
| Power Consumption | < 3W standby, < 5W active |
| Compliance | CE, FCC, RoHS |
| Package Contents | 2 x Powerline adapters, 2 x Ethernet cables, Quick Install Guide, Resource CD |
| Cleaning | Wipe with a dry, soft cloth. Do not use liquids or aerosol cleaners. |
| Safety | Use only in dry indoor locations. Do not expose to water or extreme heat. |
| Spare Parts & Repairability | No user-serviceable parts. Contact Netgear support for replacement. |
Frequently Asked Questions - PL1000-100PES NETGEAR
How do I set up my Netgear PL1000-100PES powerline adapters?
Plug one adapter into a wall outlet near your router and connect it via Ethernet. Plug the second adapter into the room where you need internet. Press the Pair buttons on both units to secure the connection. They will automatically connect and provide network access.
What is the maximum speed of the PL1000-100PES?
It supports up to 1000 Mbps using HomePlug AV2 technology. Actual speeds depend on your home's wiring and distance.
Can I use the adapters with a power strip?
For best performance, plug the adapters directly into a wall outlet. Avoid using power strips or surge protectors as they can reduce signal quality.
How do I pair a new adapter with an existing network?
Press the Pair button on an existing adapter for 2 seconds, then within 2 minutes press the Pair button on the new adapter. The Powerline LEDs will blink and turn solid when paired.
What should I do if the Powerline LED is off?
Ensure both adapters are plugged into working outlets. Press the Pair button to re-establish connection. If the LED remains off, check for electrical interference from appliances like washing machines or air conditioners.
Do the adapters need to be on the same electrical circuit?
They work best on the same circuit, but can often communicate across different circuits in a home. Performance may vary if crossing phases in split-phase systems.
Can I use the PL1000-100PES with other brands?
It is compatible with any HomePlug AV2 certified device. However, mixing brands may limit features like encryption or management.
How do I reset the adapter to factory defaults?
Use a paperclip to press and hold the Factory Reset button (usually recessed) for about 10 seconds until the LEDs blink. Release and the adapter will reboot.
Is the PL1000-100PES compatible with my router?
Yes, it works with any router that has an Ethernet port. Simply connect one adapter to the router's LAN port, and the other to a device.
What is the power consumption of the adapter?
It consumes less than 3W in standby and less than 5W during active data transfer, making it energy efficient.
User questions about PL1000-100PES NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Powerline Adapter in PDF format for free! Find your manual PL1000-100PES - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PL1000-100PES by NETGEAR.
USER MANUAL PL1000-100PES NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : PL1000-100PES
Category : Powerline Adapter