DQR-200U - Watch CASIO - Free user manual and instructions
Find the device manual for free DQR-200U CASIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Alarm Clock |
| Brand | Casio |
| Model | DQR-200U |
| Display | LCD with date and time |
| Dimensions | Approximately 10.5 x 7.0 x 3.0 cm |
| Weight | Approximately 150 g (with batteries) |
| Power Supply | 2 x AAA alkaline batteries (not included) |
| Alarm Function | Single daily alarm with snooze |
| Time Display | 12-hour or 24-hour format selectable |
| Date Display | Month, day, and day of week |
| Backlight | LED backlight for night viewing |
| Temperature | Indoor temperature display (°C/°F switchable) |
| Accuracy | ±30 seconds per month at normal temperature |
| Operating Temperature | 0°C to 40°C |
| Battery Life | Approximately 1 year with alkaline batteries |
| Placement | Desk or wall mountable (stand included) |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Do not immerse in water; avoid extreme temperatures |
| Spare Parts | Batteries (common AAA type) |
| Repairability | User-replaceable batteries; other repairs by qualified service |
Frequently Asked Questions - DQR-200U CASIO
How do I set the time on my Casio DQR-200U?
Press the SET button for about 3 seconds until the hour digits flash. Use the UP or DOWN buttons to adjust. Press SET again to cycle through minutes, year, month, day, and other settings. Press SET repeatedly to exit.
How do I set the alarm?
Press the ALARM button once to show the alarm time. Hold ALARM for about 3 seconds until the hour digits flash. Use UP/DOWN to set hours and minutes, then press ALARM to confirm. The alarm icon will appear on the display.
How do I turn off the alarm?
To stop the alarm when it sounds, press any button except SNOOZE. To deactivate the alarm completely, press the ALARM button repeatedly until the alarm icon disappears.
How do I use the snooze function?
When the alarm sounds, press the SNOOZE button (usually the LIGHT button or top button) to delay the alarm for about 5 minutes. The alarm will repeat every 5 minutes until turned off.
How do I change the batteries?
Open the battery compartment cover on the back of the clock. Remove old batteries and insert two new AAA alkaline batteries observing correct polarity. Replace the cover. All settings may reset; you will need to set time and alarm again.
Why is the display dim or not showing anything?
First, check if the batteries are installed correctly and have enough charge. Replace them if necessary. If the display is still dim, press the LIGHT button to test the backlight. If no improvement, batteries may be exhausted.
How do I switch between 12-hour and 24-hour time format?
In normal time display mode, press and hold the SET button until the time digits flash. Press UP or DOWN to toggle between 12H and 24H. Press SET to confirm and exit.
How do I display the temperature in Celsius or Fahrenheit?
Press the SET button repeatedly until the temperature unit flashes. Use UP/DOWN to select °C or °F. Press SET to confirm.
Can I mount the clock on a wall?
Yes, the Casio DQR-200U has a foldable stand on the back for desk use. For wall mounting, remove the stand and use the keyhole slot at the back to hang on a screw. Ensure the screw is securely anchored.
The alarm did not go off. What could be wrong?
Check that the alarm is set correctly (alarm icon should be displayed). Ensure the alarm time is not the same as the current time if you expect it to ring later. Also, verify that the volume (if adjustable) is not set to zero. Replace batteries if low.
User questions about DQR-200U CASIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual DQR-200U - CASIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DQR-200U by CASIO.