DQR-200 - Watch CASIO - Free user manual and instructions
Find the device manual for free DQR-200 CASIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Casio DQR-200 Watch |
| Display Type | Digital with LCD screen |
| Water Resistance | 30 meters (3 ATM) |
| Battery Type | CR2025 (replaceable) |
| Battery Life | Approximately 10 years |
| Functions | Time, date, daily alarm, hourly time signal, stopwatch, countdown timer, dual time, LED backlight |
| Dimensions (Case) | 45.0 x 40.5 x 11.2 mm |
| Weight | 45 g |
| Case Material | Resin |
| Band Material | Resin |
| Band Width | 22 mm |
| Clasp Type | Buckle |
| Glass Type | Mineral glass |
| Accuracy | ±30 seconds per month |
| Power Supply | 1 CR2025 battery |
| Auto Calendar | Pre-programmed until 2099 |
| Illumination | LED backlight (Super Illuminator) |
| Alarm Type | Daily alarm with snooze |
| Stopwatch Accuracy | 1/100 second |
| Stopwatch Capacity | 24 hours |
| Countdown Timer | 1-60 minutes with auto-repeat |
| Repair & Service | Authorized Casio service centers; battery replacement recommended every 10 years |
| Maintenance & Cleaning | Wipe with a soft dry cloth; avoid solvents or chemicals; rinse with fresh water after saltwater exposure |
| Safety Precautions | Do not operate buttons underwater; keep away from strong magnetic fields; store away from extreme temperatures |
Frequently Asked Questions - DQR-200 CASIO
How do I set the time on my Casio DQR-200?
Press and hold the ADJUST button for about 3 seconds until the seconds start flashing. Use the RECEIVE (or UP) and LIGHT (or DOWN) buttons to change values. Press MODE to move to next field. Press ADJUST to exit.
How do I set the alarm?
Press MODE until alarm time is displayed (usually a bell icon). Then press and hold ADJUST until hours flash. Use RECEIVE and LIGHT to set hours and minutes. Press ADJUST to save and exit.
How do I turn on/off the hourly time signal?
In normal timekeeping mode, press LIGHT (or SNOOZE) repeatedly until the SNZ indicator appears or disappears. The hourly signal is indicated by a beep at the top of each hour when enabled.
How do I use the stopwatch?
Press MODE to enter stopwatch mode (ST). Press START/STOP to start/stop; press LAP/RESET to record split times or reset. Maximum capacity is 24 hours.
How do I replace the battery?
Open the back case using a small screwdriver. Remove old battery and insert a new CR2025 with plus side facing up. Close the case securely and press the AC button (if present) to reset. Ensure water resistance is maintained.
Is the Casio DQR-200 water resistant?
Yes, it is water resistant to 30 meters (3 ATM). Suitable for splashes, rain, and hand washing. Do not submerge or press buttons underwater.
The display is dim; how can I improve readability?
Press the LIGHT button to activate the LED backlight. If the backlight is still dim, the battery may be weak and should be replaced. Clean the glass gently.
How do I set the countdown timer?
Press MODE until timer mode (TMR) appears. Press and hold ADJUST to set minutes (and seconds if applicable). Press START/STOP to begin countdown. The timer will beep when it reaches zero.
My watch is not receiving the time calibration signal; what should I do?
The DQR-200 does not have radio-controlled time; it must be set manually. Time is maintained by a quartz movement with manual adjustment.
How do I clean my Casio DQR-200?
Use a soft, dry cloth to wipe the case and band. For stubborn dirt, dampen the cloth with water and mild soap; avoid abrasive cleaners. Rinse with fresh water after exposure to seawater.
User questions about DQR-200 CASIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual DQR-200 - CASIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DQR-200 by CASIO.