CV380-CS - Camera MARSHALL - Free user manual and instructions
Find the device manual for free CV380-CS MARSHALL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional HD-SDI Camera |
| Brand | Marshall |
| Model | CV380-CS |
| Sensor Type | 1/3-inch Progressive Scan CMOS |
| Effective Resolution | 1920 x 1080 (Full HD) |
| Frame Rate | Up to 60 fps |
| Lens Mount | CS-mount |
| Video Output | HD-SDI (BNC) |
| Power Supply | 12V DC via locking connector |
| Power Consumption | 4.5W |
| Dimensions (W x H x D) | 67 x 56 x 120 mm |
| Weight | 0.5 kg |
| Housing Material | Aluminum alloy |
| Operating Temperature | 0°C to 40°C |
| Signal System | NTSC / PAL (switchable) |
| Gain Control | Auto / Manual |
| White Balance | ATW / Manual / Push |
| Backlight Compensation | Yes |
| Sync System | Internal / External (Genlock) |
| Included Accessories | Power adapter, BNC cable, CS-mount lens cap |
| Repairability | Modular design; authorized service centers |
Frequently Asked Questions - CV380-CS MARSHALL
How do I connect the CV380-CS to a monitor?
Use an HD-SDI cable to connect the BNC output on the camera to an HD-SDI input on your monitor. Ensure the monitor supports the same resolution and frame rate.
What lens can I use with this camera?
The CV380-CS uses a CS-mount lens. You can use any CS-mount lens, but for optimal performance, choose a lens with the appropriate focal length for your application.
Can I use the camera outdoors?
The camera is designed for indoor use. For outdoor operation, you must enclose it in a weatherproof housing and ensure it is protected from moisture and extreme temperatures.
How do I change the output format (NTSC/PAL)?
Locate the video format switch on the camera's rear panel or access the on-screen menu. Toggle between NTSC and PAL as needed. Power cycle the camera after switching.
What power supply do I need?
The camera requires a 12V DC power supply with a minimum of 0.5A. Use the included locking power adapter to avoid accidental disconnection.
How do I clean the camera lens?
Use a soft, lint-free cloth with lens cleaning solution. Gently wipe the lens surface in a circular motion. Avoid touching the lens with fingers.
Why is there no video output?
Check that the camera is powered (LED indicator on). Ensure the HD-SDI cable is securely connected and the monitor is set to the correct input. Verify the lens cap is removed.
Can I use this camera with a PTZ system?
The CV380-CS is a fixed camera. For PTZ functionality, you would need a separate PTZ mount or a different Marshall model with PTZ capability.
What is the maximum cable length for HD-SDI?
With good quality RG-6 cable, the HD-SDI signal can reliably transmit up to 100 meters (328 feet). Use a cable equalizer for longer distances.
How do I perform a factory reset?
Access the menu, navigate to 'Setup' > 'Factory Reset', and confirm. Alternatively, power off the camera, hold the 'Menu' button, and power on until the reset completes.
User questions about CV380-CS MARSHALL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual CV380-CS - MARSHALL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CV380-CS by MARSHALL.
USER MANUAL CV380-CS MARSHALL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARSHALL
Model : CV380-CS
Category : Camera