22CET6.1 - Steamer Cleveland - Free user manual and instructions
Find the device manual for free 22CET6.1 Cleveland in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steamer |
| Brand | Cleveland |
| Model | 22CET6.1 |
| Category | Commercial Steamer |
| Capacity | 6 full-size steam table pans (12" x 20" x 2.5") |
| Power Type | Electric |
| Voltage | 208-240V AC, 3-phase |
| Power Rating | 18 kW |
| Dimensions (W x D x H) | 36" x 34" x 60" (914 x 864 x 1524 mm) |
| Weight | 350 lbs (159 kg) |
| Water Inlet | 1/2" NPT, 20-60 psi (138-414 kPa) |
| Drain Connection | 1" NPT |
| Construction Material | Stainless steel (304 series) |
| Control Type | Digital with LED display |
| Temperature Range | 140°F to 250°F (60°C to 121°C) |
| Timer | 0-99 minutes with continuous operation |
| Safety Features | Door interlock, high-limit thermostat, pressure relief valve |
| Ventilation | Built-in condenser, exterior venting optional |
| Cleaning Cycle | Automatic delime and rinse cycle |
| Warranty | 2 years parts and labor |
| Country of Origin | USA |
Frequently Asked Questions - 22CET6.1 Cleveland
How do I turn on the Cleveland 22CET6.1 steamer?
Press the main power switch on the control panel. The LED display will illuminate. Set the desired cooking time using the timer knob and press the start button.
What is the proper water supply requirement?
The steamer requires a 1/2 inch NPT water inlet with pressure between 20 and 60 psi. Use filtered water to minimize mineral buildup.
How do I clean the steamer?
Daily: wipe down interior and exterior with mild detergent. Weekly: run the automatic delime cycle using a descaling solution. Monthly: remove and clean the drain strainer.
Why is the steamer not heating?
Check the power supply and circuit breaker. Ensure the door is fully closed, as the door interlock switch prevents operation. Also verify the water supply is connected.
Can I use the steamer without a water connection?
No. The 22CET6.1 is a plumbed-in model. Manual fill versions are not available for this model. Ensure a continuous water supply.
What pan sizes are compatible?
This model accommodates standard 12" x 20" x 2.5" full-size steam table pans. Up to 6 pans can be stacked simultaneously.
How do I set the timer?
Turn the timer knob clockwise to the desired minutes (0-99). The unit will start automatically. For continuous steaming, turn the knob fully past 99 to the "ON" position.
Is there a venting requirement?
The steamer has a built-in condenser that reduces steam emission. However, for optimal operation, install a vent hood or connect to an external exhaust system.
What is the warranty coverage?
Cleveland typically offers a 2-year parts and labor warranty for commercial steamer models. Register your product online to activate warranty.
Where can I find the serial number?
The serial number is located on the rating plate attached to the back or side panel of the unit. It starts with "22CET6.1" followed by sequential digits.
User questions about 22CET6.1 Cleveland
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Steamer in PDF format for free! Find your manual 22CET6.1 - Cleveland and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 22CET6.1 by Cleveland.
USER MANUAL 22CET6.1 Cleveland
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cleveland
Model : 22CET6.1
Category : Steamer