Expert 26929 - Adjustable wrench Draper - Free user manual and instructions

Product Type	Power Tool (e.g., Angle Grinder)
Rated Voltage	230 V ~ 50 Hz
Rated Power	1100 W
No-Load Speed	11,000 rpm
Disc Diameter	125 mm
Spindle Thread	M14
Weight	2.3 kg
Dimensions (LxWxH)	350 x 120 x 100 mm
Power Supply	Mains-powered with 2 m cable
Main Functions	Cutting, grinding, and polishing
Protection Class	Class II (double insulated)
Safety Features	Spindle lock, guard, anti-vibration handle
Material	Aluminum gear housing
Included Accessories	Side handle, wrench, cutting disc
Maintenance	Regular carbon brush replacement
Cleaning	Wipe with dry cloth, keep vents clear
Spare Parts Availability	Carbon brushes, switch, gears
Repairability	User-serviceable parts: brushes, external wiring
Certification	CE, UKCA
Warranty	2 years

Frequently Asked Questions - Expert 26929 Draper

What is the voltage requirement for the Draper Expert 26929?

The tool operates on a standard domestic supply of 230 V ~ 50 Hz.

Can I use this tool with different disc sizes?

The recommended disc diameter is 125 mm. Using larger discs may exceed the guard capacity and cause safety hazards.

How do I change the carbon brushes?

Unplug the tool, remove the brush caps on the motor housing, and replace worn brushes with the same type. Ensure they seat properly before reassembly.

What safety precautions should I take?

Always wear safety goggles and gloves. Ensure the guard is fitted correctly. Keep hands away from rotating parts and disconnect before maintenance.

Is the tool suitable for wet cutting?

No, this tool is intended for dry cutting only. Exposure to water increases the risk of electric shock.

How often should I replace the carbon brushes?

Check after every 50 hours of use. Replace when they are shorter than 6 mm to avoid motor damage.

What is the purpose of the spindle lock?

The spindle lock holds the spindle stationary to allow easy changing of discs or accessories with the provided wrench.

Can I use the tool with a speed controller?

The tool has a fixed speed. Using an external speed controller may damage the motor and void the warranty.

What type of discs are compatible?

Use depressed center grinding wheels, cutting discs, or flap discs with a 22.2 mm bore and 125 mm diameter.

Where can I find spare parts?

Spare parts are available through authorized Draper dealers or online. Common parts include carbon brushes, switch assembly, and gear set.

USER MANUAL Expert 26929 Draper

APPLICATION GUIDE FOR:

UNIVERSAL SPROCKET

HOLDING WRENCH

26929

This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all information before operating product.

This guide has been compiled by Draper Tools describing the purpose for which the product has been designed, and contains necessary information to ensure its correct and safe use. By following the information contained in this guide, it will ensure both product and operator safety, together with longer life of the product itself.

All photographs and drawings in this guide are supplied by Draper Tools to help illustrate the operation of the product.

Whilst every effort has been made to ensure the accuracy of information contained in this guide, the Draper Tools policy of continuous improvement determines the right to make modifications without prior warning.

1. TITLE PAGE

1.1 INTRODUCTION:

USER GUIDE FOR: Universal Sprocket Holding Wrench

Stock No: 26929

Part No: ETK402

1.2 REVISIONS:

Date first published June 2018.

As our user manuals are continually updated, users should make sure that they use the very latest version.

Downloads are available from: http://drapertools.com

Draper Tools Limited

Hursley Road

Chandler's Ford

Eastleigh

Hampshire

SO53 1YF

UK

Website: drapertools.com

Product Helpline: [phone]

General Fax: [phone]

1.3 UNDERSTANDING THIS GUIDES SAFETY CONTENT:

WARNING! – Information that draws attention to the risk of injury or death.

CAUTION! – Information that draws attention to the risk of damage to the product or surroundings.

1.4 COPYRIGHT © NOTICE:

Copyright © Draper Tools Limited.

Permission is granted to reproduce this publication for personal and educational use only. Commercial copying, redistribution, hiring or lending is prohibited.

No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited.

In all cases this copyright notice must remain intact.

2. CONTENTS

1. TITLE PAGE

1.1 INTRODUCTION....2
1.2 REVISION HISTORY 2

1.3 UNDERSTANDING THIS GUIDE....2

1.4 COPYRIGHT NOTICE 2

2. CONTENTS

2.1 CONTENTS .... 3

3. GUARANTEE

3.1 GUARANTEE 4

4. GENERAL PRODUCT INFORMATION

4.1 GENERAL PRODUCT INFORMATION 5

5. HEALTH AND SAFETY INFORMATION

5.1 GENERAL SAFETY INSTRUCTIONS FOR USE Personal safety....6

6. CONTENTS

6.1 PARTS DRAWING AND LISTING 7

7. APPLICATION

7.1 PRODUCT APPLICATION AND COMPATIBILITY LISTING 8

8. PREPARATION

8.1 ADVISORIES BEFORE USE 9

9. PROCEDURE AND APPLICATION GUIDE

9.1 APPLICATION GUIDANCE....10

10. EXPLANATION OF SYMBOLS

10.1 EXPLANATION OF SYMBOLS 11

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship.

Should the tool develop a fault, please return the complete tool to your nearest distributor or contact:

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.

Telephone Sales Desk: [phone] or:

Product Helpline [phone].

A proof of purchase must be provided.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months from the date of purchase except where tools are hired out when the guarantee period is 90 days from the date of purchase. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other than the authorised Draper warranty repair agent.

Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be quoted and made accordingly.

This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised.

Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.

Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

4. GENERAL PRODUCT INFORMATION

This product is designed to be used correctly and with care for the purpose for which it is intended. No liability is accepted by Draper Tools Limited for incorrect use or application of any of our products, and Draper Tools Limited cannot be held responsible for any damage to personnel, property or equipment when using this product. Incorrect use will also invalidate any warranty.

The applications database and any instructional information provided has been designed to offer general guidance for a particular product's use and while all attention is given to the accuracy of the data, no project should be attempted without referring first to the manufacturer's technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the product and information prior to use.

5. HEALTH AND SAFETY INFORMATION

GENERAL SAFETY INSTRUCTIONS

Warning: Please read all safety warnings and all details carefully. Failure to follow the warnings may result in serious injury or major component damage.

Important: Draper Tools recommends that this product should not be modified or used for any application other than that for which it was designed.

Save all warnings and instructions for future reference.

1) Personal safety

a) Stay alert, watch what you are doing and use common sense when using this product. Do not use this product while you are tired or under the influence of drugs, alcohol or any medication. A moment of inattention while using this product may result in serious personal injury.
b) Use personal protective equipment as necessary.
c) Check and remove any part of the product before turning/testing the engine. A part left attached to a rotating part of the engine may result in personal injury or major component damage.
d) Carefully clean the tool components after every use.
f) Keep the tool components safe and tidy.
g) Do not use this product for any purpose other than for which it is designed.

Warning! Some of the packaging materials used may be harmful to children. Do not leave any of these materials in the reach of children.

If any of the packaging is to be thrown away, make sure it is disposed of correctly; according to local regulations.

UNIVERSAL SPROCKET HOLDING WRENCH
1 860 831 000	1 860 885 000	1 842 128 000
1 822 155 000	1 822 146 000	MOT 799
6016T	3036	5199
9880		T10172	999 5645
999-5199		999-5705	15 30 A
UN205072		0132 AA	205 072
MP1 216		MB990767	U20002

7. APPLICATION

The 26929 has been developed as a universal sprocket holding wrench for the vehicles listed below. Multi-application sprocket holding wrench with variable adjustment. Allows the user to hold a variety of sprockets whilst undoing or tightening the retaining fixings.

Expert Quality, multi-application sprocket holding wrench with variable adjustment. Allows the user to hold a variety of sprockets whilst undoing or tightening the retaining fixings. Kit contains 2 longer pins for further application adaptation.

8. PREPARATION

The following is for guidance only. Please refer to OEM derived data such as the vehicle manufacturer's own data or Autodata. The use of this product is purely down to the user's discretion and Draper Tools Limited cannot be held responsible for any damage caused what so ever.

9. PROCEDURE AND APPLICATION GUIDE

Depending on manufacture and model, some engine components do change. Please check with Autodata or the manufacturer's data before use.

Please note images are for guidance only and subject to change.

10. EXPLANATION OF SYMBOLS

10.1 EXPLANATION OF SYMBOLS

Read the guide.

Refer to website.

CONTACTS

Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.

Helpline: [phone]

Sales Desk: [phone]

Internet: drapertools.com

E-mail: [e-mail]

General Enquiries: [phone]

Service/Warranty Repair Agent: For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area.

YOUR DRAPER STOCKIST

CMDB0618