02514 - Welding machine Draper - Free user manual and instructions
Find the device manual for free 02514 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Welding Machine (Inverter) |
| Model | 02514 |
| Brand | Draper |
| Weight | Approx. 5.0 kg (11 lbs) |
| Dimensions (L x W x H) | 300 x 150 x 200 mm (11.8 x 5.9 x 7.9 in) |
| Power Input | 230V AC, 50/60 Hz, 16A |
| Welding Current Range | 20 - 160 A |
| Duty Cycle at 160A | 60% (10 minute cycle) |
| Electrode Size (max.) | 3.2 mm (1/8 in) |
| Welding Processes | MMA (Manual Metal Arc), Lift TIG |
| Protection Class | IP21S |
| Insulation Class | H |
| Cooling System | Fan cooled |
| Included Accessories | Electrode holder, earth clamp, welding shield, brush, chipping hammer |
| Safety Features | Overheat protection, overload protection, anti-stick, VRD (Voltage Reduction Device) |
| Maintenance | Regularly clean ventilation slots, check cables for damage, replace consumables |
| Spare Parts Availability | Electrode holders, earth clamps, internal PCBs, fan, switch |
| Repairability | User-serviceable: cables, electrode holder, earth clamp. Internal repairs by qualified technician. |
| General Information | Portable inverter welder suitable for home and light industrial use. Supports both DC+ and DC- polarity. |
Frequently Asked Questions - 02514 Draper
What type of welding does the Draper 02514 support?
The Draper 02514 supports MMA (Manual Metal Arc) welding and can also be used for Lift TIG welding with an optional TIG torch.
What is the welding current range of this machine?
The welding current range is 20 to 160 amps, adjustable in steps.
What is the duty cycle of the Draper 02514?
The duty cycle is 60% at 160A over a 10-minute period. At lower currents, the duty cycle increases.
What size electrodes can I use?
You can use electrodes up to 3.2 mm (1/8 in) in diameter.
How do I set the correct welding current?
Refer to the electrode manufacturer's recommendations. A general rule: for mild steel, current (A) = electrode diameter (mm) x 30-40. Start low and adjust.
What safety features are included?
The machine includes overheat protection, overload protection, anti-stick, and a Voltage Reduction Device (VRD) to reduce open-circuit voltage for safety.
How should I maintain the welding machine?
Keep the ventilation slots clean, check all cables for damage before use, and store in a dry place. Replace worn electrode holders or earth clamps as needed.
Can I use the machine for aluminum welding?
This machine is primarily for mild steel and stainless steel. For aluminum, you would need a specialized TIG torch with AC capability, which this model does not support.
What accessories are included in the box?
The package includes an electrode holder, earth clamp, welding shield, brush, and chipping hammer.
Where can I find replacement parts?
Replacement parts are available from Draper authorized dealers or online stores. Common parts are electrode holders, earth clamps, and internal PCBs.
User questions about 02514 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual 02514 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 02514 by Draper.
USER MANUAL 02514 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 02514
Category : Welding machine