AT-GS950/48 - Switch Allied Telesis - Free user manual and instructions
Find the device manual for free AT-GS950/48 Allied Telesis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Ports | 48 x 10/100/1000BASE-T |
| Uplinks | 4 x Gigabit SFP combo ports |
| Dimensions (W x D x H) | 440 x 300 x 44 mm (17.3 x 11.8 x 1.73 in) |
| Weight | 3.8 kg (8.4 lbs) |
| Power Supply | Internal AC 100-240V, 50-60Hz, max 120W |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.38 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | IEEE 802.1Q, up to 256 VLANs |
| Layer 2 Features | STP, RSTP, MSTP, Link Aggregation (LACP), IGMP Snooping |
| Layer 3 Features | Static routing, RIP, OSPF |
| QoS | 8 priority queues, 802.1p, DSCP |
| Security | 802.1X, ACL, Port Security, SSH/SSL, RADIUS |
| Management | Web GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3, RMON |
| Mounting | 19-inch rackmount (1U), brackets included |
| Cooling | Internal fan, side-to-side airflow |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC, UL |
Frequently Asked Questions - AT-GS950/48 Allied Telesis
How to access the web interface of AT-GS950/48?
Connect your computer to one of the switch ports. Set your PC IP to 192.168.1.x (subnet 255.255.255.0). Open a browser and go to 192.168.1.1. Default credentials: admin / password.
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds using a paperclip. The switch will reboot with factory settings.
Does the AT-GS950/48 support PoE?
No, the AT-GS950/48 is a non-PoE switch. For PoE models, see the AT-GS950/48P series.
How to configure VLANs on this switch?
Access the web GUI under VLAN > 802.1Q VLAN. Create VLANs by assigning tagged/untagged ports. Use the CLI with vlan database commands.
What is the default IP address?
The default management IP is 192.168.1.1 with subnet mask 255.255.255.0.
How to update firmware?
Download the latest firmware from Allied Telesis website. In the web GUI, go to Maintenance > Firmware Upgrade, choose the file, and click Apply. Do not power off during update.
Can I use SFP modules for fiber connections?
Yes, the switch has 4 combo SFP ports that support 1000BASE-SX/LX modules. Ensure compatible modules are used.
How to enable SNMP monitoring?
In the web GUI, go to Management > SNMP. Enable SNMP, set community strings (e.g., 'public' for read-only), and configure SNMP trap destinations.
What is the maximum number of VLANs supported?
The switch supports up to 256 VLANs (IEEE 802.1Q).
How to troubleshoot no link on a port?
Check the Ethernet cable and ensure the connected device is powered on. Verify port status in Monitor > Port Statistics. Try disabling/enabling the port via Administration > Port Settings.
User questions about AT-GS950/48 Allied Telesis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual AT-GS950/48 - Allied Telesis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-GS950/48 by Allied Telesis.
USER MANUAL AT-GS950/48 Allied Telesis
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Allied Telesis
Model : AT-GS950/48
Category : Switch