SAFETY 1ST OnBoard 35LT - Car seat

OnBoard 35LT - Car seat SAFETY 1ST - Free user manual and instructions

Find the device manual for free OnBoard 35LT SAFETY 1ST in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SAFETY 1ST OnBoard 35LT - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Infant Car Seat
Brand Safety 1st
Model OnBoard 35LT
Weight Capacity 4 to 35 lb (1.8 to 15.9 kg)
Height Limit Up to 32 inches (81.3 cm)
Product Dimensions Approx. 30 x 18 x 16 inches (76 x 46 x 41 cm)
Product Weight Approx. 9.5 lb (4.3 kg)
Power Source None (manual operation)
Orientation Rear-facing only
Installation Method Vehicle seat belt or LATCH system
Harness Type 5-point harness
Carry Handle Yes, adjustable
Canopy Yes, removable
Infant Insert Yes, removable
Cleaning Instructions Hand wash harness and padding with mild soap; air dry. Wipe shell with damp cloth.
Safety Standards Complies with FMVSS 213 and ASTM F2050-15
Expiration 6 years from date of manufacture
Replacement Parts Available through Safety 1st customer service

Frequently Asked Questions - OnBoard 35LT SAFETY 1ST

What is the weight and height limit for the Safety 1st OnBoard 35LT?
The seat is designed for infants weighing 4 to 35 lb (1.8 to 15.9 kg) and up to 32 inches (81.3 cm) tall.
Is the OnBoard 35LT rear-facing only?
Yes, this infant car seat is rear-facing only. It is not convertible to forward-facing.
How do I clean the car seat cover?
Remove the cover and harness. Hand wash with mild soap and cold water, then air dry. Never machine wash or dry.
Can I use the LATCH system to install this seat?
Yes, the OnBoard 35LT can be installed using either the vehicle seat belt or the LATCH system. Refer to the manual for proper installation.
What is the expiration date of this car seat?
The seat expires 6 years from the date of manufacture. Check the label on the bottom for the exact expiration date.
Does the seat come with an infant insert?
Yes, it includes a removable infant insert for smaller babies (4-11 lb). Use it until the child’s shoulders reach the lowest harness slots.
How tight should the harness be?
The harness should be snug enough that you cannot pinch any slack at the shoulder. The chest clip should be at armpit level.
Can I use this car seat on an airplane?
Yes, the OnBoard 35LT is FAA-approved for air travel. Install it in a window seat with the seat belt.
How do I adjust the carry handle?
Press the handle release buttons on both sides and rotate to one of the three positions: carry, recline, or upright.
Can I replace parts like the harness or buckle?
Yes, replacement parts are available through Safety 1st customer service. Only use genuine Safety 1st parts to ensure safety.

User questions about OnBoard 35LT SAFETY 1ST

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car seat in PDF format for free! Find your manual OnBoard 35LT - SAFETY 1ST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OnBoard 35LT by SAFETY 1ST.

USER MANUAL OnBoard 35LT SAFETY 1ST

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SAFETY 1ST

Model : OnBoard 35LT

Category : Car seat