Arolla Aqua - Uncategorized Claypaky - Free user manual and instructions
Find the device manual for free Arolla Aqua Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Professional LED Wash Light |
| Marque | Claypaky |
| Modèle | Arolla Aqua |
| Dimensions (L x l x H) | 450 x 350 x 500 mm |
| Poids | 15 kg |
| Alimentation | AC 100-240 V, 50/60 Hz |
| Consommation maximale | 400 W |
| Source lumineuse | LED 400 W, RGBW |
| Température de couleur | 2,700 - 8,000 K (ajustable) |
| Indice de protection | IP65 |
| Contrôle | DMX512, RDM, Art-Net (optionnel) |
| Canaux DMX | 16/24/32 (selon mode) |
| Angle du faisceau | 7° - 50° (zoom motorisé) |
| Mouvement | Pan 540°, Tilt 270° |
| Refroidissement | Ventilateur actif, mode silencieux disponible |
| Température de fonctionnement | -10°C à 45°C |
| Humidité admissible | 10% - 90% (sans condensation) |
| Connectivité | XLR 5 broches (entrée/sortie), PowerCon |
| Nettoyage | Nettoyer la lentille avec un chiffon doux et de l'alcool isopropylique |
| Entretien | Vérifier les joints d'étanchéité tous les 6 mois |
| Pieces detachees | Modules LED, alimentation, ventilateurs disponibles |
| Garantie | 2 ans |
Frequently Asked Questions - Arolla Aqua Claypaky
How do I set the DMX address on the Arolla Aqua?
Use the control panel on the rear of the fixture. Press Menu until DMX Address appears, then use the up/down buttons to set the desired address. Press Enter to confirm.
What is the IP rating of the Arolla Aqua?
The Arolla Aqua has an IP65 rating, meaning it is dust-tight and protected against water jets from any direction.
Can I use the fixture in rain or snow?
Yes, the IP65 rating allows outdoor use, but ensure all cable connections are properly sealed and the fixture is securely mounted.
How do I clean the lens?
Use a soft, lint-free cloth lightly dampened with isopropyl alcohol. Avoid abrasive cleaners and never spray liquid directly onto the fixture.
What are the power consumption specifications?
The fixture consumes a maximum of 400W at 100-240V AC, 50/60Hz. Use a dedicated power circuit with appropriate rating.
How do I reset the fixture to factory defaults?
From the menu, navigate to Factory Reset and press Enter. Confirm when prompted. This resets all settings including DMX address and personality.
Does the Arolla Aqua support RDM?
Yes, it supports RDM (Remote Device Management) over DMX, allowing you to remotely set addresses and monitor status from a compatible controller.
What is the recommended distance between fixtures for truss mounting?
Maintain at least 50 cm (20 inches) between fixtures to allow proper airflow and prevent overheating. Also ensure clamps are rated for the fixture's weight.
How often should I replace the LED module?
The LED module is rated for 50,000 hours of operation. Replacement is needed only if the output dims significantly or the module fails. Contact Claypaky service for replacements.
Can I use the fixture with a battery power supply?
While technically possible with a pure sine wave inverter, the fixture requires stable AC power. Frequent voltage fluctuations may damage the electronics. Use only with recommended power sources.
User questions about Arolla Aqua Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Arolla Aqua - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Arolla Aqua by Claypaky.
USER MANUAL Arolla Aqua Claypaky
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Claypaky
Model : Arolla Aqua
Category : Uncategorized