Power Spot 6 Q5 - Lighting Showtec - Free user manual and instructions
Find the device manual for free Power Spot 6 Q5 Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Spotlight |
| Light Source | 6x 5W RGBW LEDs (30W total) |
| Beam Angle | 10° |
| Pan Range | 540° |
| Tilt Range | 270° |
| Dimensions (L x W x H) | 260 x 210 x 330 mm |
| Weight | 4.2 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 60W max |
| Control Modes | DMX (6/9/15 channels), Master/Slave, Auto, Sound Active |
| DMX Connectors | 3-pin XLR in/out |
| Display | LCD display with buttons |
| IP Rating | IP20 (indoor use only) |
| Cooling | Fan cooled |
| Maintenance | Clean lens with soft cloth, avoid solvents |
| Safety | Use safety cable, keep away from flammable materials |
| Spare Parts | LED modules, power supply, mainboard available |
Frequently Asked Questions - Power Spot 6 Q5 Showtec
How to set DMX address on Power Spot 6 Q5?
Press Menu button, navigate to DMX Address, set desired address using Up/Down buttons, press Enter to save.
What is the beam angle of this fixture?
The beam angle is 10 degrees, providing a narrow spotlight effect.
Can I use the Power Spot 6 Q5 outdoors?
No, it is rated IP20 and designed for indoor use only. Keep away from moisture.
How to reset the fixture to factory settings?
Go to Menu > Factory Reset, confirm with Enter. The display will show 'Reset OK'.
What DMX channels does the Power Spot 6 Q5 use?
It supports 6, 9, or 15 channel modes for different control options.
Why is the fixture not responding to DMX?
Check DMX cable connection, ensure DMX Address is correct, and that the controller is sending data. Also verify termination resistor is used if needed.
How to clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid alcohol or solvents that may damage the coating.
Can I replace the LEDs myself?
LED modules are replaceable by qualified personnel. Contact Showtec support for spare parts and instructions.
What is the maximum ambient temperature for operation?
The fixture should be operated in ambient temperatures between 0°C and 40°C (32°F to 104°F).
How to update firmware?
Firmware updates are done via DMX using a special programmer or Showtec software. Check the official website for updates.
User questions about Power Spot 6 Q5 Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Power Spot 6 Q5 - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Power Spot 6 Q5 by Showtec.
USER MANUAL Power Spot 6 Q5 Showtec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Showtec
Model : Power Spot 6 Q5
Category : Lighting