WV-S8563LG - Surveillance Camera i-PRO - Free user manual and instructions
Find the device manual for free WV-S8563LG i-PRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Surveillance Camera |
| Model | WV-S8563LG |
| Brand | i-PRO |
| Image Sensor | 1/3-inch CMOS |
| Resolution | Up to 5MP (2560x1920) |
| Night Vision | Up to 30m with IR LED |
| Lens | Varifocal, 2.8-8mm |
| Field of View | Horizontal: 108° to 37° |
| Weather Rating | IP66 |
| Power Supply | PoE (IEEE 802.3af) |
| Power Consumption | 6.5W typical |
| Dimensions (WxHxD) | 75 x 65 x 170 mm |
| Weight | Approx. 600 g |
| Network Interface | 10/100BASE-TX RJ45 |
| Video Compression | H.265, H.264, JPEG |
| Audio | 2-way audio (built-in mic & speaker) |
| Storage | MicroSD slot up to 256GB |
| Operating Temperature | -30°C to 60°C |
| Mount Type | Wall or ceiling mount |
| Certifications | CE, FCC, RoHS |
| Included Accessories | Mount bracket, screws, template |
Frequently Asked Questions - WV-S8563LG i-PRO
How do I reset the WV-S8563LG to factory defaults?
Press and hold the reset button on the camera for 10 seconds. The camera will restart with default settings. For detailed steps, refer to the hardware manual.
What is the maximum resolution supported?
The camera supports up to 5MP (2560x1920) at 20 fps. Lower resolutions can achieve higher frame rates up to 30 fps.
Is the camera suitable for outdoor use?
Yes, the WV-S8563LG has an IP66 weather rating, making it dust-tight and protected against heavy rain.
How do I connect the camera to my network?
Connect the camera to a PoE switch or injector using an Ethernet cable. The camera will automatically obtain an IP address via DHCP. Use the i-PRO Configuration Tool to discover and manage the camera.
Can I use the camera without internet access?
Yes, the camera can operate locally on your network. However, certain features like remote access and cloud recording require internet connectivity.
What type of power supply does the camera need?
The camera supports Power over Ethernet (PoE) IEEE 802.3af. It also has a 12V DC input if PoE is not available.
How do I adjust the viewing angle?
Loosen the screws on the mount bracket and adjust the camera position. The varifocal lens can also be manually rotated to change the field of view from 108° to 37° horizontal.
Does the camera support audio recording?
Yes, it has a built-in microphone and speaker for two-way audio. You can listen and talk through compatible software or NVR.
What should I do if the camera is not showing any image?
Check the Ethernet cable connection, ensure PoE power is active, and verify that the camera is not stuck in a boot loop. Try rebooting via the software interface or by power cycling.
How can I clean the camera lens and housing?
Use a soft, dry microfiber cloth to gently wipe the lens. For the housing, dampen a cloth with mild soapy water, then dry thoroughly. Avoid abrasive cleaners.
User questions about WV-S8563LG i-PRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual WV-S8563LG - i-PRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WV-S8563LG by i-PRO.
USER MANUAL WV-S8563LG i-PRO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : i-PRO
Model : WV-S8563LG
Category : Surveillance Camera