LD-006 - 3D Printer CREALITY - Free user manual and instructions
Find the device manual for free LD-006 CREALITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3D Printer |
| Brand | Creality |
| Model | LD-006 |
| Printing Technology | LCD-based Resin (Masked Stereolithography) |
| Build Volume | 192 x 120 x 200 mm (7.6 x 4.7 x 7.9 in) |
| LCD Screen | Monochrome 4K (3840 x 2400 pixels) |
| XY Resolution | 0.05 mm |
| Layer Thickness | 0.01 - 0.2 mm |
| Light Source | UV LED Array (wavelength ~405 nm) |
| Print Speed | Up to 80 mm/h (depending on layer thickness) |
| Connectivity | USB 2.0, Optional Wi-Fi |
| Slicer Software | Creality Slicer, Lychee Slicer, Chitubox |
| Supported File Formats | .STL, .OBJ, .CTB, .LGS |
| Resin Compatibility | Standard 405 nm UV-curable resins |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | ~120 W |
| Weight | 18 kg (39.7 lbs) |
| Dimensions | 380 x 330 x 540 mm (15 x 13 x 21.3 in) |
| Operating Temperature | 15-30 °C (59-86 °F) |
| Maintenance | Clean resin vat after each use; replace FEP film when damaged |
| Safety Features | UV cover lock, overheat protection, automatic shut-off |
| Repairability | Replaceable LCD screen, FEP film, and power supply |
| Warranty | 1 year limited |
| Included Accessories | Build plate, resin vat, power cable, USB drive, tools, gloves, mask |
Frequently Asked Questions - LD-006 CREALITY
How do I level the build plate on the Creality LD-006?
Loosen the build plate screws, place a piece of paper over the LCD, home the build plate, adjust until the paper has slight resistance, then tighten screws.
What types of resin can I use?
Standard 405 nm UV-curable resins from brands like Anycubic, Elegoo, or Creality. Avoid using high-temperature or flexible resins without adjusting settings.
How do I clean the resin vat?
Pour excess resin back into the bottle, use a silicone spatula to remove residue, wipe with isopropyl alcohol, and avoid scratching the FEP film.
Why are my prints failing to stick to the build plate?
Common causes: incorrect leveling, insufficient bottom exposure time (try increasing by 5-10 seconds), or dirty build plate. Re-level and clean the plate with alcohol.
How do I update the firmware?
Download the latest firmware from Creality’s website, copy the .bin file to a FAT32-formatted USB drive, insert into printer, and navigate to the update option in settings.
What is the recommended layer thickness?
For most models, 0.05 mm provides a good balance between detail and speed. For finer details, use 0.02-0.03 mm; for faster prints, 0.1 mm.
How do I replace the FEP film?
Remove the resin vat, unscrew the frame, peel off the old FEP film, clean the frame, install a new film with slight tension, and reattach. Ensure no wrinkles.
What should I do if the LCD screen is damaged?
Replace the screen by disconnecting the printer power, removing the LCD cover, unplugging the ribbon cable, installing a new screen, and recalibrating.
Can I print with transparent resin?
Yes, but you may need to increase exposure times by 2-4 seconds and use fine sanding/polishing for transparency. Avoid excessive UV scattering.
How often should I lubricate the Z-axis?
Lubricate the lead screw with white lithium grease every 3-6 months or after 500 hours of printing to ensure smooth movement.
User questions about LD-006 CREALITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual LD-006 - CREALITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LD-006 by CREALITY.
USER MANUAL LD-006 CREALITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CREALITY
Model : LD-006
Category : 3D Printer