6 PerspeX Balanced - Turntable PRO-JECT - Free user manual and instructions
Find the device manual for free 6 PerspeX Balanced PRO-JECT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Belt-drive turntable with balanced output |
| Dimensions (W x H x D) | 462 x 125 x 340 mm |
| Weight | 11 kg |
| Power Supply | External power supply (15V DC / 500 mA) |
| Speeds | 33 ⅓ and 45 rpm (electronic speed change) |
| Platter | 300 mm acrylic platter with stainless steel axle |
| Tonearm | Pro-Ject 9cc Evolution, carbon/aluminium sandwich |
| Effective Arm Length | 230 mm |
| Overhang | 18 mm |
| Effective Arm Mass | 8.5 g (without counterweight) |
| Tracking Force Range | 0 - 30 mN (recommended: 15 - 20 mN) |
| Outputs | Balanced XLR (male) and unbalanced RCA (female) |
| Input Sensitivity (Balanced) | 500 µV (for 5 V output) |
| Signal-to-Noise Ratio | 70 dB (balanced output) |
| Wow & Flutter | ±0.08% (DIN) |
| Speed Drift | ±0.10% (DIN) |
| Included Accessories | Acrylic dust cover, felt mat, balanced interconnect cable (1.2 m), power supply |
| Maintenance | Clean platter and stylus with soft brush; avoid solvents on acrylic |
| Safety | Disconnect power before cleaning; keep away from water |
| Repairability | Replaceable drive belt, cartridge; tonearm adjustments by dealer |
| General | High-mass design with magnetic tonearm damping; made in Europe |
Frequently Asked Questions - 6 PerspeX Balanced PRO-JECT
How do I set up the turntable?
Place the turntable on a stable, level surface. Install the platter and belt, connect the tonearm cables, balance the tonearm, and set the tracking force. Refer to the manual for detailed instructions.
What cartridge is compatible with the 6 PerspeX Balanced?
The turntable accepts standard half-inch mount cartridges. We recommend moving magnet or moving coil cartridges with a tracking force of 15-20 mN.
How do I adjust the speed?
Use the electronic speed selector on the front panel to switch between 33 ⅓ and 45 rpm. The speed is controlled electronically; no manual adjustment is needed.
What is the balanced output for?
The balanced XLR output provides a lower noise floor and better signal integrity when connected to an XLR input on your preamplifier or receiver. Use the included balanced cable.
How often should I clean the stylus?
Clean the stylus every 20-30 hours of play with a carbon fiber brush, gently brushing from back to front. For deeper cleaning, use a stylus cleaning gel.
Can I use a different power supply?
Only use the original power supply (15V DC, 500 mA). Using an incorrect power supply may damage the electronics.
How do I replace the drive belt?
Remove the platter, slide the old belt off the motor pulley and platter rim. Fit the new belt around the platter rim and motor pulley, and reinstall the platter. Ensure the belt is not twisted.
What is the best way to reduce vibrations?
Place the turntable on a solid, heavy stand or isolation base. Avoid placing near speakers or other sources of vibration. The acrylic platter and magnetic damping help reduce resonance.
Can I upgrade the tonearm?
The 9cc tonearm is integrated and not designed for upgrade to a different model. However, you can replace the cartridge and headshell for performance improvements.
How do I clean the acrylic platter?
Use a soft, lint-free cloth slightly dampened with water or a mild acrylic cleaner. Wipe gently in a circular motion; do not use alcohol or abrasive cleaners.
User questions about 6 PerspeX Balanced PRO-JECT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual 6 PerspeX Balanced - PRO-JECT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6 PerspeX Balanced by PRO-JECT.
USER MANUAL 6 PerspeX Balanced PRO-JECT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PRO-JECT
Model : 6 PerspeX Balanced
Category : Turntable