Claypaky

Mini-B ParLED Aqua WW - Lighting Claypaky - Free user manual and instructions

Find the device manual for free Mini-B ParLED Aqua WW Claypaky in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Claypaky Mini-B ParLED Aqua WW - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Par Light
Model Mini-B ParLED Aqua WW
Brand Claypaky
Light Source High-power LED, warm white (WW)
Color Temperature 3000K (typical warm white)
Beam Angle 25° (adjustable lens optional)
Luminous Flux Approx. 2000 lm
Power Consumption 120 W
Input Voltage 100-240 V AC, 50/60 Hz
IP Rating IP65 (waterproof, dust-tight)
Control Protocol DMX512 (3 & 5 pin XLR)
DMX Channels 1 or 2 channels (selectable)
Housing Material Die-cast aluminum, tempered glass
Cooling Passive convection (fanless)
Operating Temperature -10°C to 40°C
Dimensions (W x H x D) 250 x 250 x 280 mm
Weight 5.0 kg
Mounting Yoke bracket with floor stand or truss clamp
Maintenance Clean lens with soft cloth and mild detergent; check cables regularly
Safety Class I protection, equipotential bonding point
Spare Parts Available LED module, power supply, control board, lens, gaskets
Reparability Modular design; user-replaceable LED module and power supply
Warranty 2 years (subject to terms)

Frequently Asked Questions - Mini-B ParLED Aqua WW Claypaky

What is the IP rating of the Mini-B ParLED Aqua WW?
The fixture has an IP65 rating, meaning it is fully protected against dust and low-pressure water jets from any direction.
How do I set the DMX address?
Use the three-digit DIP switches on the rear panel. Set them according to the desired DMX address (binary). Refer to the manual for address tables.
Can I use this light outdoors in rain?
Yes, the IP65 rating allows it to be used outdoors in rain, but ensure all cable connections are properly sealed to prevent moisture ingress.
What type of LED does it use?
It uses a high-power warm white LED with a color temperature of approximately 3000K, suitable for both stage and architectural lighting.
How do I clean the lens?
Use a soft, lint-free cloth lightly moistened with water or a mild glass cleaner. Avoid abrasive materials that may scratch the glass.
What is the beam angle?
The standard beam angle is 25°. Optional accessories (e.g., diffuser lenses) can achieve wider angles up to 45°.
Is the fixture flicker-free for video?
Yes, the LED driver uses high-frequency PWM, making it flicker-free for most video frame rates.
How do I replace the LED module?
Disconnect power, remove the rear cover, unplug the wiring connectors, and unscrew the LED module. Install the new module in reverse order. Ensure thermal paste is applied.
Can I use a third-party controller?
Yes, the fixture accepts standard DMX512 signals, so it works with any DMX controller, including lighting desks and software via USB-DMX interfaces.
What is the maximum ambient temperature for operation?
The maximum ambient operating temperature is 40°C (104°F). Do not use in environments exceeding this to avoid overheating.

User questions about Mini-B ParLED Aqua WW Claypaky

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual Mini-B ParLED Aqua WW - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mini-B ParLED Aqua WW by Claypaky.

USER MANUAL Mini-B ParLED Aqua WW Claypaky

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Claypaky

Model : Mini-B ParLED Aqua WW

Category : Lighting