GT-1 - Lighting GLP - Free user manual and instructions
Find the device manual for free GT-1 GLP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Light |
| Brand | GLP (German Light Products) |
| Model | GT-1 |
| Dimensions (L x W x H) | 345 x 235 x 470 mm |
| Weight | 12.5 kg |
| Power Consumption | 350 W |
| Light Source | 200 W LED Engine |
| Color Temperature | 6,700 K |
| Beam Angle | 7° - 45° Zoom |
| DMX Channels | 16 / 24 / 28 selectable |
| Control Protocol | DMX-512, RDM |
| Pan/Tilt Range | 540° Pan / 270° Tilt |
| Built-in Effects | Color wheel, gobo wheel, prism, frost, zoom |
| Housing Material | Aluminum and polycarbonate |
| IP Rating | IP20 |
| Connectors | 5-pin XLR in/out, PowerCon in/out |
| Display | LCD menu with touch buttons |
| Cooling System | Active thermal management with variable speed fan |
| Maintenance | Regular cleaning of optics and fans, check cable connections |
| Safety | Always use safety cable, ensure stable mounting, disconnect power before servicing |
| Spare Parts | Replacement LED engine, gobo wheel, color wheel, power supply |
| Accessories Included | Omega bracket, power cable, user manual |
| Reparability | Modular design; replaceable parts available from GLP service centers |
| Environmental | RoHS compliant, energy-efficient LED |
Frequently Asked Questions - GT-1 GLP
How do I reset the fixture to factory defaults?
Navigate to the menu, select 'Fixture Settings' then 'Factory Reset'. Confirm with 'Yes'.
What is the maximum ambient temperature for operation?
The maximum ambient temperature is 45°C (113°F). Ensure adequate ventilation.
How can I update the firmware?
Connect the fixture via DMX or USB (if available), download the latest firmware from GLP website and use the GLP Firmware Uploader tool.
The fixture does not respond to DMX. What should I check?
Check DMX cable connections, ensure correct DMX address, and verify that the controller is sending data. Try a known working cable.
How often should I clean the optics?
Clean the front lens and gobos every 3-6 months depending on usage. Use a soft lint-free cloth and isopropyl alcohol.
Can I replace the LED engine myself?
Replacing the LED engine requires technical expertise. It is recommended to contact GLP authorized service centers to avoid damage.
What does the 'Tilt Error' message mean?
This indicates a problem with the tilt motor or position sensor. Check for mechanical blockage, recalibrate via menu, or contact support.
Is the fixture compatible with RDM?
Yes, the GT-1 supports RDM (Remote Device Management) for remote addressing and monitoring.
How do I enable fan control mode?
Go to 'Fixture Settings' > 'Fan Mode' and select 'Auto', 'Silent', or 'Full' depending on noise requirement.
What is the recommended mounting position?
The fixture can be mounted in any orientation but ensure the base is securely fastened and use a safety cable.
User questions about GT-1 GLP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual GT-1 - GLP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GT-1 by GLP.
USER MANUAL GT-1 GLP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GLP
Model : GT-1
Category : Lighting